Fisher 3582 Pneumatic Single-Acting Positioner
Product Name: Fisher 3582 Pneumatic Single-Acting Positioner
Product Brand: Fisher
Product Code: 3582
Product Artikel: Fisher 3582 Pneumatic Single-Acting Positioner
Fisher™ 3582 and 3582i Positioners and 582i
Electro-Pneumatic Converter Fisher 3582 pneumatic valve positioners are used with diaphragm-actuated, sliding-stem control valve assemblies. This pneumatic valve positioner receives a pneumatic input signal from a control device and modulates the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal. Specifications Area Classification ATEX Group II Category 2 Gas and Dust, CUTR for Groups II/III Category 2 Equipment Certifications ATEX, CUTR, PED Communication Protocol 3-15 or 6-30 psi, 0.2 -1.0 or 0.4 -2.0 bar Pneumatic Signal Diagnostics No Input Signal Pneumatic Max Outlet Pressure 50 psi Mounting Type Actuator Mounted Operating Temperature Standard Temperature, High Temperature Position Control Modulating Safety Certification NIL Supply Media Air, Natural Gas Other Configurations Contact your local Emerson business partner or sales office to learn about additional specifications or options for this product. Features The range of the adjustable zero and span permits the use of all standard input signals, including split ranges. Because units from one positioner family can be used in a variety of control applications, basic spare parts inventory requirements are simplified and fewer spare parts are needed to support a plant-wide positioner applications base. With the cover removed, zero and span adjustments are easily accessible and can be made with a screw driver and spanner. Changes in supply pressure and valve load have minimal effect on positioner operation. Case, components, and gasket materials are able to withstand harsh environments. Positioner bleed air purges internal parts for additional protection.. Simple adjustments permit switching between direct and reverse action. To support diagnostic testing of valve/actuator/positioner packages with the FlowScanner™ valve diagnostic system, connectors, piping, and other hardware can be installed between the positioner and the actuator.
