Product Name: Mag THS Type Hydraulic Cylinder Product Brand: Mag Product Code: THS Type Product Artikel: Mag THS Type Hydraulic Cylinder
Specifications » Assembly dimensions and mounting types meet MAG standards. » 8 standard mounting types. » Piston diameter: 40 mm - 200 mm » Piston rod diameter: 22 mm - 110 mm » Stroke length up to 3000 mm » With optional double rod version Technical Specifications Standards: Assembly dimensions and mounting types meet MAG standard. Piston diameter and piston rod diameter complies with ISO 3320 standard Test standard is ISO 10100. Nominal Pressure: 160 Bar (16 MPa) Test Pressure: 240 Bar (24 MPa) Optionally, it can be manufactured with an operating pressure of 250 bar (25 MPa) Fluid Type: Mineral oils DIN 51524 HL, HLP. Fluid Temperature: -20 °C to +80 °C Operating Temperature: -20 °C to +80 °C. Optionally, it can be manufactured with an operating temperature between -30 °C and +200 °C. Viscosity: 5 cSt – 300 cSt Piston Speed: Maximum 0.5 m/s. Cleanliness class according to ISO Standard Maximum pollution level of hydraulic fluid is ISO 4406 (c) class 20/18/15. Cleanliness classes specified for components in hydraulic system should be provided. Efficient filtering prevents errors and increases the life of components. Application Conditions: » Movement axes and connection points of hydraulic cylinder and piston rod should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided. Weight of hydraulic cylinder or piston rod should be considered. » Buckling length and buckling load of piston rod and/or hydraulic cylinder should be considered. » Compliance of sealing elements with fluid should be considered at maximum piston speed. » Maximum operating pressure should be complied at each operation of hydraulic cylinder. » Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided. Materials: Cylinder tube is manufactured from honed St52Bk+S material. Piston rod is manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance. Test: Each cylinder is subjected to internal and external leak tightness test in accordance with MAG standards and ISO 10100 standards before being shipped. Warranty and Service: MAG THS series cylinders are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. User induced errors and errors resulting from inappropriate operating conditions are outside the scope of warranty. Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled. You can contact with us for your requests for any kinds of special design cylinders.
يرجى الاتصال بفريق الدعم المباشر لدينا أو ملء نموذج العرض عبر الإنترنت للحصول على معلومات مفصلة عن المنتج Mag - THS Type - Mag THS Type Hydraulic Cylinder سوف نعود إليك في أقرب وقت ممكن.
