Mts Sensor MT 551218 Positions Sensor

Mts Sensor MT 551218 Positions Sensor

Product Name: Mts Sensor MT 551218 Positions Sensor
Product Brand: Mts Sensor
Product Code: MT 551218
Product Artikel: Mts Sensor MT 551218 Positions Sensor
Input Measured variables: Displacement Measuring range: 50 - 2500 mm in 5 mm steps Output Signal characteristic: Continuously analog output restricted by noise or A/D converter of control unit Voltage: 0.25...4.75 VDC 0.5...4.5 VDC Current: 4...20 mA inverse: 4.75...0.25 VDC inverse: 4.5...0.5 VDC inverse: 20...4 mA Resolution: typ ± 0.1 mm Internal Cycle Time: 2 ms Accuracy Linearity: .1 mm Hysteresis: ± 0.1 mm Setpoint Tolerance: ≤ 1 mm Operating conditions Assembly orientation: In any direction Operating temperature electronics, storage temp.: -40°C...+105°C Fluid temperature: -30°C...+85°C Dew point, humidity: 90 % rel. humidity, no condensation acc. EN60068-2-30 Pressure Operating pressure ratings: Pressure impulse test acc. Ø 10 mm sensor rod PN: 350 bar Pmax: 450 bar DIN EN ISO 19879 IP rating sensor housing Sensor housing: IP67, EN60529 Environmental testing: Shock: Vibration: EMC: IEC-68-2-27 100 g (6 ms) single hit 50 g (11 ms) at 1000 Shocks per axis IEC 68-2-6 (10...2000 Hz) Ø 10 mm sensor rod 15g (r.m.s) ISO 14982 agricultural and forestry machines ISO 11452-2 (radiated immunity) (Increased immunity voltage output 100V/m) ISO 11452-4 (conducted immunity) ISO 7637-1/2 (transient Impulses) Materials and dimensions Sensor rod: Housing: Mechanical assembly: Stainless steel 1.4306 / AISI 304L (Ø 10 mm) Stainless steel 1.4305 / AISI 303 Flange housing Ø 48 mm O-ring 40.87 x 3.53 mm NBR 80, backup ring 42.6 x 48 x 1.4 PTFE Electrical installation Connector: Supply voltage: Voltage supply ripple: Power drain: Electric strength: Over voltage protection (GND - VDC): Polarity protection (GND - VDC): Load: Connector System 2 x M12x1 with O-ring 7 x 1.35 mm NBR 70 Connecting flange brass nickel-plated with O-ring 13 x 1.6 NBR 70 12/24 VDC (tolerance range 8 - 32 VDC) < 1 % PP < 1 W 500 VDC (DC ground to machine ground) + 36 VDC up to -36 VDC RL ≥ 10 kΩ mA output RL ≤ 250 Ω (12 VDC) VDC output RL ≤ 500 Ω (24 VDC) VDC output