NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
NORD
رقم المنتج: SK-TU3-CTR
المصنع: NORD
Confirmed Rating:
☆☆☆☆☆☆
(4.5)
Rating Count: 14122
يرجى الاتصال بفريق الدعم المباشر لدينا أو ملء نموذج العرض عبر الإنترنت للحصول على معلومات مفصلة عن المنتج NORD - SK-TU3-CTR - NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE سوف نعود إليك في أقرب وقت ممكن.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
Description for NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
Size 10: 395mm Wide x 292mm Deep x 720mm High. IP20Weight: 49kg.Overload: 150% x 60 seconds, 200% x 3.5 secondsSpeed Control Range: 0-400HzBraking: Minimum 3 ohms external resistor (not supplied) - use the 'Which Resistor' button on this page.2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, DC Bus Terminals, RJ12 port for RS232 Diagnostic Interface.RJ12 Port for RS485 Communication, Safe Stop (STO/SS1), CANopen In/Out RJ45 on board, PTC Input.Input Current: 364AInput Voltage: 380-480V Three Phase +10% -20% at 47-63Hz.EMC Filters: IEC EN61800-3 Category C2 (Industrial) up to cable length of 20 metres shielded.Nord recommend DCL choke to be fitted with this item - please see linked items below.Cubicle mount.Rated 40°C Ambient.Ventilation space in front: [not specified].Ventilation space above and below: 100mm.Ventilation space at sides: 0mm.Heat Loss at max output: 2640W (approx.)Mounting via 4 x 8mm slotted holes on supplied brackets at rear on 704mm x 360mm centres.Manufacturer part number is SK 515E-133-340-A . Sometimes known as 275721330. (SK515E-133-340-A)Replacement for SK700E-133-340-O if fitted with either Basic I/O module (SK CU1-BSC) or Standard I/O Module (SK SU1-STD). For details of differences please see link below.
Latest Comments for NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
غيرها من المنتجات الموصى بها NORD