Description: UC2000-30GM-IUR2-V15 Ultrasonic Sensor ( PEPPERL+FUCHS
)
PEPPERL+FUCHS UC2000-30GM-IUR2-V15 Ultrasonic Sensor
Product Name: PEPPERL+FUCHS UC2000-30GM-IUR2-V15 Ultrasonic Sensor
Product Brand: PEPPERL+FUCHS
Product Code: UC2000-30GM-IUR2-V15 Ultrasonic Sensor
Product Artikel: PEPPERL+FUCHS UC2000-30GM-IUR2-V15 Ultrasonic Sensor
Sensing range 80 ... 2000 mm Adjustment range 120 ... 2000 mm Dead band 0 ... 80 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 180 kHz Response delay 65 ms minimum 195 ms factory setting Indicators/operating means LED green solid: Power-on flashing: Standby mode or program function object detected LED yellow 1 solid: object in evaluation range flashing: program function LED yellow 2 solid: object in detection range flashing: program function LED red solid: temperature/program plug not connected flashing: fault or program function object not detected Temperature/TEACH-IN connector Temperature compensation , Evaluation range programming , output function setting Electrical specifications Operating voltage 10 ... 30 V DC , ripple 10 % SS Power consumption ≤ 900 mW Time delay before availability ≤ 500 ms Interface Interface type RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit Input/Output Synchronization bi-directional 0 level -U B ...+1 V 1 level: +4 V...+U B input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms Synchronization frequency Common mode operation max. 30 Hz Multiplex operation ≤ 30 Hz / n , n = number of sensors , n ≤ 5 Output Output type 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V Resolution evaluation range [mm]/4000, but ≥ 0.35 mm Deviation of the characteristic curve ≤ 0.2 % of full-scale value Repeat accuracy ≤ 0.1 % of full-scale value Load impedance current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm Temperature influence ≤ 2 % from full-scale value (with temperature compensation) ≤ 0.2 %/K (without temperature compensation) Compliance with standards and directives Standard conformity Standards EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003 Approvals and certificates EAC conformity TR CU 020/2011 UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated ≤36 V Ambient conditions Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Connection type Connector plug M12 x 1 , 5-pin Degree of protection IP65 Material Housing stainless steel (1.4305 / AISI 303) PBT plastic parts Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam Mass 170 g Factory settings Output evaluation limit A1: 200 mm evaluation limit A2: 2000 mm rising ramp
