PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
Product Name: PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
Product Brand: PHOENIX CONTACT
Product Code: 2761622 SUBCON 25/M-SH
Product Artikel: PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
Dimensions
Max. cable diameter 10 mm
Min. cable diameter 4 mm
Width 16 mm
Height 55 mm
Length 79 mm
Back to top
Environmental conditions
Ambient temperature (operation) -20 ° C ... 75 ° C
Ambient temperature (stock / transport) -25 ° C ... 80 ° C
Altitude ≤ 5000 m (For limitations, see manufacturer's declaration for operation by altitude above sea level)
Protection class IP20
IP20
Back to top
General
Nominal voltage UN 50 V DC
Nominal current IN 100 mA
Modbus signal
RS-232
RS-422
RS-485
Insertion / pull cycles> 200
SUBCON set screws 4-40 UNC
Tightening torque 0.4 Nm
Housing material ABS, metal coated
Pin assignment All connections are 1: 1 on the screw terminal block
MTTF 6706 Years (SN 29500 standard, temperature 25 ° C, working cycle 21% (5 days a week, 8 hours a day))
1817 Years (SN 29500 standard, temperature 40 ° C, working cycle 34.25% (5 days a week, 12 hours a day))
155 Years (SN 29500 standard, temperature 40 ° C, working cycle 100% (7 days a week, 24 hours a day))
Back to top
Connection data
Connection D-SUB connection
No. of poles 25
Connection method D-SUB connector
Connection PCB connection
Connection method Screw connection
Multi vein min. conductor cross section area 0,14 mm²
Multicore max. conductor cross section area 1 mm²
Single core min. conductor cross section area 0,14 mm²
Single core max. conductor cross section 1.5 mm²
Min. AWG conductor cross section, stranded 26
Max. AWG conductor cross section, stranded 18
Conductor cross section AWG min. 26
Conductor cross section AWG max. 16
Cable stripping length 5 mm
Tightening torque 0.4 Nm
Back to top
Conformity / approvals
EAC definition
identification EAC
Description ATEX
Description II 3 G Ex nA IIC T4 Gc X
Additional text Please pay attention to the special assembly instructions given in the document!
Description Corrosive gas test
Description ISA-S71.04-1985 G3 Harsh Group A
