Ringfeder RfN 7013.0 Locking Assembly
Ringfeder
رقم المنتج: RfN 7013.0
المصنع: Ringfeder
Confirmed Rating:
☆☆☆☆☆
☆ (3.5)
Rating Count: 10819
يرجى الاتصال بفريق الدعم المباشر لدينا أو ملء نموذج العرض عبر الإنترنت للحصول على معلومات مفصلة عن المنتج Ringfeder - RfN 7013.0 - Ringfeder RfN 7013.0 Locking Assembly سوف نعود إليك في أقرب وقت ممكن.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Ringfeder RfN 7013.0 Locking Assembly
Description for Ringfeder RfN 7013.0 Locking Assembly
These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter.Characteristics Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. High rotation speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads. Example applications crane running wheels couplings gearwheels flywheels fan wheels Mounting of Locking Assembly The Locking Assemblies are supplied slightly oiled and ready-to-use. The values for T, Fax, pW and pN apply to Locking Assemblies in delivery condition. Surface finishes For shafts and hub bores Ra = 1,6 μm Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8 Change of screw tightening torques A change of the TA-values given in the above table is not admissible.
Latest Comments for Ringfeder RfN 7013.0 Locking Assembly
غيرها من المنتجات الموصى بها Ringfeder