BECKHOFF EL2732 2-Channel Triac Output Terminal
Product Name: BECKHOFF EL2732 2-Channel Triac Output Terminal
Product Brand: BECKHOFF
Product Code: EL2732
Product Artikel: BECKHOFF EL2732 2-Channel Triac Output Terminal
The EL2732 output terminal uses a power switch to control mains voltage from 12 V to 230 V AC. The switching element is a triac, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The steady load capacity of a digital output is 1 A. The EtherCAT Terminal has two independent outputs and indicates its signal state by means of light emitting diodes. Technical data EL2732 | ES2732 Connection technology triac output, 2-wire Number of outputs 2 x make contacts (without power contacts), mutually locked Rated load voltage 12…230 V AC Load type ohmic, inductive Distributed clocks – Max. output current 0.5 A Switching times in zero crossing, 0.1…10 ms Frequency range 47…63 Hz Surge voltage protection > 275 V Peak current 40 A (16 ms), 1.5 A (30 s) Standby current 0.6 mA Leakage current (OFF state) typ. 0.8 mA, max. 1.5 mA Switch-on time 0.1…10 ms, zero crossing Switch-off time T/2 Max. residual voltage 1.5 V (60 mA…1 A), 150 Ω (< 60 mA) Current consumption E-bus typ. 120 mA Electrical isolation 500 V (E-bus/field voltage), 3750 V AC (1 min.) Current consumption power contacts – Bit width in the process image 2 outputs Configuration no address or configuration setting Special features suitable for conventional blind motors Weight approx. 55 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. class/installation pos. IP 20/variable Pluggable wiring for all ESxxxx terminals Product announcement estimated market release on request
