industrialmaterialcenter.com

CMO Serie A Knife Gate Valve

CMO

Produktnummer: Serie A
Hersteller: CMO
Confirmed Rating: ☆☆☆☆☆ (3.9)
Rating Count: 8399

Wenden Sie sich an unser Live-Support-Team, um weitere Informationen zum CMO Serie A Knife Gate Valve-Markencode von CMO zu erhalten, oder füllen Sie ein Online-Angebotsformular aus. Wir werden uns so schnell wie möglich bei Ihnen melden.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for CMO Serie A Knife Gate Valve

Description for CMO Serie A Knife Gate Valve

Unidirectional Knife Gate Valve Wafer design valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop and include various seat and packing materials available. Face to face dimension in accordance with CMO Valves standard. An arrow is marked on the body indicating the flow direction. This knife gate valve is suitable for liquids that contain a maximum of 5% suspended solids. If it is used for dry solids in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow. When a knife gate valve remains open for long periods of time and the body’s internal walls are parallel a very large torque is required to close it. Model A’s body is cone-shaped inside, providing greater space. When the valve is closed the solids stored inside it can be easily removed. The valve is defined as unidirectional and these valves are normally at risk of the gate bending due to counter-pressure. Stem protection hood is independent from the handwheel securing nut, this means the hood can be disassembled without the need to release the handwheel. This advantage allows regular maintenance operations to be performed, such as lubricating the stem. Stem on the CMO valve is made of 18/8 stainless steel. Another added advantage, as some manufacturers produce it with 13% chrome and it gets rusty very quickly. Handwheel is made of GJS 500 nodular cast iron. Some manufacturers produce them in normal cast iron which can lead to breakages in the event of very high operating torque or knocks. Utilization Knife gate valve is suitable for liquids that contain a maximum of 5%  suspended  solids. The valve it is used for dry solids in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow. Designed for applications such as: Paper Industry, Mining, Silo emptying, Chemical plants, Bumping Food, Industry Sewage treatment. Sizes Standard manufacturing sizes: From DN50 up to DN1400 Working pressures DN 50-250 = 10 bar – DN 300-400 = 6 bar – DN 450 = 5 bar DN 500-600 = 4 bar – DN 700-1600 = 2 bar Directives • Pressure Equipment Directive: (PED) ART 4.3 /CAT.1. • Potential Explosive Atmospheres Directive: (ATEX) CAT.3 ZONA 2 y 22 GD.

Latest Comments for CMO Serie A Knife Gate Valve


Produktvorschläge CMO


CMO Serie A Knife Gate Valve
CMO Series XB Knife Gate Valve
CMO Serie AB Knife Gate Valve
CMO Serie AD Knife Gate Valve
CMO Serie B Knife Gate Valve
CMO Series C Knife Gate Valve
CMO Serie D Knife Gate Valve
CMO Serie E Knife Gate Valve
CMO Series F Knife Gate Valve
CMO Serie FK Knife Gate Valve
CMO Serie GA Knife Gate Valve
CMO Serie GH Knife Gate Valve
CMO Serie GD Knife Gate Valve
CMO Serie GL Slurry Gate Valve
CMO Serie K Knife Gate Valve
CMO Serie L Knife Gate Valve
CMO Serie T Slurry Knife Gate Valve
CMO Serie TD Knife Gate Valve