Ringfeder RfN 7013.0 Locking Assembly
Ringfeder
Produktnummer: RfN 7013.0
Hersteller: Ringfeder
Confirmed Rating:
☆☆☆☆☆
☆ (3.5)
Rating Count: 10819
Wenden Sie sich an unser Live-Support-Team, um weitere Informationen zum Ringfeder RfN 7013.0 Locking Assembly-Markencode von Ringfeder zu erhalten, oder füllen Sie ein Online-Angebotsformular aus. Wir werden uns so schnell wie möglich bei Ihnen melden.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Ringfeder RfN 7013.0 Locking Assembly
Description for Ringfeder RfN 7013.0 Locking Assembly
These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter.Characteristics Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. High rotation speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads. Example applications crane running wheels couplings gearwheels flywheels fan wheels Mounting of Locking Assembly The Locking Assemblies are supplied slightly oiled and ready-to-use. The values for T, Fax, pW and pN apply to Locking Assemblies in delivery condition. Surface finishes For shafts and hub bores Ra = 1,6 μm Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8 Change of screw tightening torques A change of the TA-values given in the above table is not admissible.
Latest Comments for Ringfeder RfN 7013.0 Locking Assembly
Produktvorschläge Ringfeder