industrialmaterialcenter.com

Ringfeder TNZ ZCAK/ZCBK Gear Coupling

Ringfeder

Produktnummer: TNZ ZCAK/ZCBK
Hersteller: Ringfeder
Confirmed Rating: ☆☆☆☆☆☆ (4.4)
Rating Count: 14156

Wenden Sie sich an unser Live-Support-Team, um weitere Informationen zum Ringfeder TNZ ZCAK/ZCBK Gear Coupling-Markencode von Ringfeder zu erhalten, oder füllen Sie ein Online-Angebotsformular aus. Wir werden uns so schnell wie möglich bei Ihnen melden.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Ringfeder TNZ ZCAK/ZCBK Gear Coupling

Description for Ringfeder TNZ ZCAK/ZCBK Gear Coupling

Type with limited end float The double cardanic versions RINGFEDER® TNZ ZCAK and RINGFEDER® TNZ ZCBK are equipped with a limitation of the end float. The limitation of the end float serves to axially locate a shaft that is mounted on sleeve bearings. he rotor of an electric motor with sleeve bearings can thus be aligned within a desired tolerance range via the coupling to the bearing of the driven machine, so that the rotor remains at its magnetic centre during acceleration of the driving machine. The limitation of the end float constrains the ability to compensate for angular and radial shaft misalignments. In contrast to the TNZ ZCAK with integrated O-ring, the TNZ ZCBK has screwed-on, separate O-ring supports.Characteristics General features Torsionally rigid gear coupling made of high-quality steel Very compact design results in a high-power density Compensates for angular, radial and axial shaft offset Suitable for use in temperatures up to +120 °C if special seals are used Available with split sleeve (ZCA / ZCB - ZCA model range also available in ZCB design) and single-piece sleeve (ZCH) The elastic O-Ring can be replaced without having to move the coupled machines Bores up to 270 mm Torques up to TKn = 195,000 Nm / TKmax = 390,000 Nm Speeds up to nmax = 6,000 rpm General description The RINGFEDER® TNZ coupling is a torsionally rigid twin cardanic gear coupling. Toothing The coupling housings have a straight internal toothing whilst the hubs have an external toothing with a chased variable radius. As a result, the hubs can move spatially within the housing and thus compensate angular, radial and axial shaft misalignment of the adjoined shaft ends within specified tolerances. Depending on coupling type and size, the standard toothing permits an angular misalignment of up to 0.5 degrees per toothing-plane and an axial movement of several millimetres. The max. possible radial shaft displacement is dependent on the distance between the two toothing planes. Other toothing geometries can be used for further specific applications. Materials High-grade tooth profiles and grease with ultra high-pressure additives guarantee low-restoring forces and a long serviceable life. The material used is forged steel with an apparent yielding point of at least 335 N/mm2. Special materials can be used for further specific applications. Sealing is carried out using O-Rings of synthetic rubber. The housings are centred and held together by fit-bolts and self-locking nuts. Temperature The use of special seals permits the temperature limit to be raised to 120 °C. Balance At peripheral speeds upwards of 30 m/s it is advisable to dynamically balance the coupling. Special applications If greater misalignments are anticipated at higher speeds and torques, an examination is necessary, performed with the assistance of a special computing programme. This is independent of the determined size. The value TKmax may not be exceeded in any state of operation (start-up, electrical short circuit, blocking, etc.). Tolerances and standards The bore tolerance is ISO H7, if not differently ordered. The bore diameters listed refer to keyways to DIN 6885-1 with wide toleranz ISO P9.

Latest Comments for Ringfeder TNZ ZCAK/ZCBK Gear Coupling


Produktvorschläge Ringfeder


Ringfeder RfN 7003 Locking Assembly
Ringfeder RfN 7004 Locking Assembly
Ringfeder RfN 7005 Locking Assembly
Ringfeder RfN 7006 Locking Assembly
Ringfeder RfN 7007 Locking Assembly
Ringfeder RfN 7013.0 Locking Assembly
Ringfeder RfN 7013.1 Locking Assembly
Ringfeder RfN 7014 Locking Assembly
Ringfeder RfN 7015.1 Locking Assembly
Ringfeder RfN 7061 Locking Assembly
Ringfeder RfN 7110 Locking Assembly
Ringfeder RfN 7070 Locking Assembly
Ringfeder RfN 7075 Locking Assembly
Ringfeder RfN 7085 Locking Assembly
Ringfeder RfN 7090 Locking Assembly
Ringfeder RfN 4181 Heavy Duty Series Shrink Disc
Ringfeder RfN 4022 Shrink Disc
Ringfeder RfN 4023 Shrink Disc