Hydac 0030 D 010 BH4HC Filter Element

Hydac

Número de producto: 0030 D 010 BH4HC
Artikelnummer: 0030 D 010 ON
Productor: Hydac
Confirmed Rating: ☆☆☆☆ ☆☆ (2.5)
Rating Count: 11908

Puede rellenar el formulario de presupuesto en línea o ponerse en contacto con el equipo de asistencia en directo para obtener el Hydac marca, 0030 D 010 BH4HC producto. Nos pondremos en contacto con usted lo antes posible.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Hydac 0030 D 010 BH4HC Filter Element

Description for Hydac 0030 D 010 BH4HC Filter Element

Betamicron® Filter Elements BN4HC/BH4HC up to 210 bar, filtration rating 3, 5, 6, 10, 20, 25 μm  Collapse stability BN4HC: 20 bar BH4HC: 210 bar Temperature range -30 °C to +100 °C For sealing material FPM to -10 °C Flow direction From outside to inside Filtration rating 3, 5, 6, 10, 20, 25 μm Bypass cracking pressure Pressure filter element (InchDInch): Without bypass valve as standard Pressure filter element to DIN 24550 (InchDNInch): Without bypass valve as standard Pressure filter element for MFX filter (InchMXInch): standard 3.5 bar Return line filter element to DIN 24550 (InchRNInch): standard 3.5 bar (others on request) Category of filter element Single use element  The 3-stage structure of Betamicron® filter elements ensures the maximum contamination retention and filtration performance. An additional drainage layer directs the fluid flow with optimal efficiency, achieving particularly favourable Δp/Q characteristics.  An innovative bonding process used for the longitudinal seam guarantees that the cut ends of the mesh pack remain completely sealed even under high load variations. This eliminates the possibility of particles crossing from the contaminated to the clean side.  To prevent the formation of zinc soap, which occurs mainly in conjunction with water-based fluids (HFA / HFC) and bio oils, no components containing zinc are utilized. The metal tube which forms a stable core inside the element is constructed as a spiral lock seam tube. This provides consistent stability and a significant reduction in element weight.   The pleated filter mesh pack is encased in a stable outer wrap. This wrap distributes the incoming fluid evenly over the mesh pack. In addition the mesh pack is not directly exposed to the flow, and this protects it from pulsating flows. In this way, the element achieves extremely high fatigue strength values. Moreover, the mesh pack is protected from mechanical damage.

Latest Comments for Hydac 0030 D 010 BH4HC Filter Element

Otros productos recomendados Hydac