Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor
Mts Sensor
Número de producto: MH SIL2
Productor: Mts Sensor
Confirmed Rating:
☆☆☆☆☆
☆ (3.5)
Rating Count: 10661
Puede rellenar el formulario de presupuesto en línea o ponerse en contacto con el equipo de asistencia en directo para obtener el Mts Sensor marca, MH SIL2 producto. Nos pondremos en contacto con usted lo antes posible.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor
Description for Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor
OutputSignal characteristic Continuously analog output restricted by noise or A/D converter of control unitVoltage 0.5…4.5 VDC with failure signal < 0.5 VDC LO > 4.5 VDC HICurrent 4…20 mA with failure signal < 4.0 mA LO > 20 mA HIMeasured value PositionMeasurement parametersResolution Typ. 0.1 mmPower uptime Typ. 250 msLinearity 0050…0250 mm 0255…2000 mm 2005…2500 mm≤ ±0.1 mm ±0.04 % (F.S.) ≤ ±0.8 mmHysteresis ±0.1 mmInternal sample rate 1 msSetpoint tolerance ≤ 1 mmOperating conditionsOperating temperature electronics −40…+100 °CStorage temperature −20…+65 °CFluid temperature −30…+85 °CHumidity EN 60068-2-30, 90 % rel. humidity, no condensationIngress protection – M12 connector EN 60529 – IP69K (correctly fitted)Ingress protection – Sensor housing EN 60529 – IP67Shock test IEC 60068-2-27, 100 g (6 ms) single shock, 50 g (11 ms) at 1000 shocks per axisVibration test IEC 60068-2-64, 20 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) – resonance frequencies excludedEMC test UNECE Regulation 10 Rev 5: Electromagnetic CompatibilityISO 14982 Agricultural and forest machinesEN 13309 Construction machinesImmunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)Emissions: CISPR 25Transiente Impulses: ISO 7637-1/2E.S.D.: ISO/TR 10605The sensor meets the requirements of the EC directives and is marked withPressure (according to DIN EN ISO 19879)* Ø 10 mm pressure pipePN (nominal operating) 350 barPmax (max. overload) 450 barPstatic (proof pressure) 625 barDesign / MaterialSensor electronics housing Stainless steel 1.4305 (AISI 303)Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFESensor rod Stainless steel 1.4306 (AISI 304L)M12 connector insert Material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pinsM12 flange Brass nickel-plated with O-ring 13 × 1.6 NBR 70Stroke length 50…2500 mmMechanical mountingMounting position AnyMounting instruction Please consult the technical drawingsElectrical installationConnector M12 male connectorSupply voltage 12 VDC (8…32 VDC) 24 VDC (16…32 VDC)Current consumption Typ. < 100 mA Typ. < 50 mALoad (output VDC) RL > 10 kΩ RL > 10 kΩLoad current (output VDC) Typ. 0.5 mA Typ. 0.5 mALoad (output mA) RL < 250 Ω RL < 500 ΩInrush current Max. 2.5 A/2 ms Max. 4.5 A / 2 msSupply voltage ripple < 1 % PPPower drain < 1 WOver voltage protection (GND - VDC) Up to +36 VDCPolarity protection (GND - VDC) Up to −36 VDCInsulation Resistance R ≥ 10 MΩ @ 60 secElectric strength 500 VDC (DC GND to chassis GND)*/ According to calculations under use of the FKM guidelineCycles Ø 10 mm sensor rodDynamic pressure: < 2 × 106 pressure cycles 350 barStatic pressure: < 2 × 104 pressure cycles 450 barProof pressure: Maximum 5 minutes testing time for cylinder pressure test 625 bar
Latest Comments for Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor
Otros productos recomendados Mts Sensor