CMO Serie GD Knife Gate Valve

CMO

Numéro de produit: Serie GD
Fabricant: CMO
Confirmed Rating: ☆☆☆☆☆☆ (4.4)
Rating Count: 6680

Veuillez contacter notre équipe d'assistance en direct ou remplir le formulaire d'offre en ligne pour obtenir des informations détaillées sur le produit CMO Serie GD CMO Serie GD Knife Gate Valve Nous reviendrons vers vous dès que possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for CMO Serie GD Knife Gate Valve

Description for CMO Serie GD Knife Gate Valve

Product description Slurry valves Slurry valve for very loaded products with solids, used for suspended matter in mining. It does not present neither salient nor any split in the pipe. It is not needed any joint between the flanges as it is incorporated in the body. Bidirectional wafer‐design knife gate valve. Monoblock one‐piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with low pressure drop. Various seat materials available. This valve main characteristic is that it provides a full continuous flow.  The GD valve’s body is composed of one single “monoblock” piece.  Utilization If it is used for dry solids, slurry in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow. This Slurry valve are designed for applications such as: Paper Industry, Mining Slurry Valves, Silo emptying, Chemical plants, Bumping Food, Industry Sewage treatment, Slurry treatment. Sizes Standard manufacturing sizes: From DN50 up to DN600 Bigger diameters under request. Working pressures DN 50-600 = 10 bar DN 700-900 = 6 bar DN 1000-1400 = 4 bar Directives • Pressure Equipment Directive: (PED) ART 4.3 /CAT.1. • Potential Explosive Atmospheres Directive: (ATEX) CAT.3 ZONA 2 y 22 GD.

Latest Comments for CMO Serie GD Knife Gate Valve

Autres produits recommandés CMO