Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX

Gestra

Numéro de produit: UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Fabricant: Gestra
Confirmed Rating: ☆☆☆☆☆☆ (4.8)
Rating Count: 1857

Veuillez contacter notre équipe d'assistance en direct ou remplir le formulaire d'offre en ligne pour obtenir des informations détaillées sur le produit Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX Nous reviendrons vers vous dès que possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX

Description for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX

Description Float traps type UNA 45 are designed for removing condensate from steam or compressed air. Float traps type UNA 46 and UNA 46A are designed for removing condensate from steam or other gases / gas mixtures. Equipment fitted with control unit SIMPLEX and SIMPLEX-P is operated and controlled by the float and the rolling ball. Equipment with this type of control unit is particularly suitable for cold condensate and cold distillates. The rolling ball of the control unit SIMPLEX-P is made of Perbunan® rubber, which ensures tight shut-off of the seat. Equipment with control unit DUPLEX may also be used for air venting the installation. This type of control unit is particularly suitable for saturated steam systems. The control unit DUPLEX consists of a float operated rolling ball valve and a temperature dependent air-venting facility. Do not expose the membrane regulator capsule of the DUPLEX control unit to superheat conditions above 5 K. By means of the externally adjustable internal bypass it is possible to adjust a bypass passage that flows past the control unit. The equipment must only be used within the allowable pressure and temperature limits and only if the chemical and corrosive influences on the equipment are taken into account.

Latest Comments for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX

Autres produits recommandés Gestra