Hawe DG364
Hawe
Numéro de produit: DG364
Fabricant: Hawe
Confirmed Rating:
☆☆☆☆☆
☆ (3.5)
Rating Count: 2239
Veuillez contacter notre équipe d'assistance en direct ou remplir le formulaire d'offre en ligne pour obtenir des informations détaillées sur le produit Hawe DG364 Hawe DG364 Nous reviendrons vers vous dès que possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Hawe DG364
Description for Hawe DG364
Product DescriptionOBSOLETE - Limited inventory, no more will be manufacturedPressure Range: 100-500 BarDesign: Spring loaded piston type pressure switch, zero leakageTemperature: Ambient: approx. -40...+80å¡CPressure fluid: Hydraulic fluid acc. to DIN 51524Viscosity range: min. approx. 4; max. approx. 1500 mm2/secOptimal operation range: approx. 10...500 mm2/secProduct InformationThey are used to issue an electrical switching command or signal for further operations when a predefined pressure value is reached. Different versions (with pressure setting on an adjusting knob, main and secondary switch, screw-on pressure switch) enable their use in a wide range of applications.A design-related difference (hysteresis) of 8... 20% is to be expected between the upper and lower switching point in piston-type pressure switches.In contrast to this, the type DG5E and DG6 electronic pressure switches provide the option to select two independent pressure switching points and/or program or adjust the hysteresis. Type DT is an analogous pressure sensor.Electro-hydraulic pressure switches are devices which close or open electrical contacts when pressurized (DIN ISO 1219-1). They are usually used for all applications where a electrical signal should be triggered whenever the set pressure is achieved or exceeded. This signal may be utilized to start a subsequent operation cycle (operation of a solenoid actuated directional valve) or to stop an operation cycle (cut-off of the pump drive, idle position of a solenoid actuated directional valve).
Latest Comments for Hawe DG364
Autres produits recommandés Hawe