Hydac 236089 Bladder Accumulators

Hydac 236089 Bladder Accumulators

Product Name: Hydac 236089 Bladder Accumulators
Product Brand: Hydac
Product Code: 236089
Product Artikel: Hydac 236089 Bladder Accumulators
Bladder Accumulators Standard   Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators for storing fluids. HYDAC bladder accumulators are based on this principle, using nitrogen as the compressible medium.   A bladder accumulator consists of a fluid section and a gas section with the bladder acting as the gas-proof screen. The fluid around the bladder is connected to the hydraulic circuit so that the bladder accumulator draws in fluid when the pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit.   HYDAC bladder accumulators can be used in a wide variety of applications, some of which are listed below: ·          energy storage ·          emergency operation ·          force equilibrium ·          leakage compensation ·          volume compensation ·          shock absorption ·          vehicle suspension ·          pulsation damping         ·          Standard bladder accumulator   SB330/400/500/550 The HYDAC standard bladder accumulators consists of the pressure vessel, the flexible bladder with gas valve and the hydraulic connection with check valve. The pressure vessels are seamless and manufactured from high tensile steel.   ·          Bladder accumulator   SB330N The flow optimised design of the standard oil valve enables the maximum possible operating fluid flow rate to increase to 25 l/s on this accumulator type.   ·          High flow bladder accumulator   SB330H HYDAC high flow bladder accumulators, type SB330H, are high performance accumulators with a flow rate of up to 30 l/s. The fluid connection is enlarged to allow higher flow rates. 

Hydac 236089 Bladder Accumulators