industrialmaterialcenter.com

Mag KSD (ISO 21287) Series Pneumatic Cylinder

Mag

Numéro de produit: KSD (ISO 21287) Series
Fabricant: Mag
Confirmed Rating: ☆☆☆☆☆ (3.4)
Rating Count: 4749

Veuillez contacter notre équipe d'assistance en direct ou remplir le formulaire d'offre en ligne pour obtenir des informations détaillées sur le produit Mag KSD (ISO 21287) Series Mag KSD (ISO 21287) Series Pneumatic Cylinder Nous reviendrons vers vous dès que possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Mag KSD (ISO 21287) Series Pneumatic Cylinder

Description for Mag KSD (ISO 21287) Series Pneumatic Cylinder

Specifications» Assembly dimensions and mounting types meet ISO 21287 standards.» 5 standard mounting types.» Piston diameter: 32 mm -100 mm» Piston rod diameter: 12 mm - 20 mm» Stroke length up to 250 mm» Standard magnetic piston.» Standard non-rotated rod.» With optional double rod version.» With optional stainless rod version.Technical SpecificationsStandards:Assembly dimensions and mounting types meet ISO 21287 standardPiston diameter and piston rod diameter comply with ISO 3320 standardTest standard is ISO 10099.Maximum Operation pressure: 10 Bar (1 MPa)Fluid Type: Filtered dry or lubricated compressed air. If lubricated air will be used, it is recommended to use MAG special air preparation oil.  Operation Temperature: -20 °C to +80 °C.Piston Speed: Maximum 1 m/s.System Cleanliness:Particle size in compressed air should be maximum 50 µm.Magnetic Sensor:MAG MCS1-M series sensor should be used.Application Conditions:» Movement axes and connection points of pneumatic cylinder and piston rod should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided.   » Buckling length and buckling load of piston rod and/or pneumatic cylinder should be considered.» Maximum operating pressure should be complied in each operation of pneumatic cylinder.» Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided.Materials:Cylinder tube is manufactured from anodic coated aluminum profile material.Piston rod and guide rods are manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance.   Front and rear covers are manufactured by aluminum injection moulding.Test:Each cylinder is subjected to internal and external leak tightness test in accordance with MAG standards and ISO 10099 standards before being shipped.Warranty and Service:MAG KSD series cylinders are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. User induced errors and errors resulting from inappropriate operating conditions are outside the scope of warranty.Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled.You can contact with us for your requests for any kinds of special design cylinders.

Latest Comments for Mag KSD (ISO 21287) Series Pneumatic Cylinder


Autres produits recommandés Mag


Mag 220V 50/60 HZ Coil
Mag SV-1/2-5/2-BY-24 VDC Pneumatic Valve
Mag KHS Type Hydraulic Cylinder
Mag NHS Type Hydraulic Cylinder
Mag THS Type Hydraulic Cylinder
Mag 32-100 Diameter Range Pneumatic Cylinder
Mag 125-250 Diameter Range Pneumatic Cylinder
Mag ISO 6432 Series Pneumatic Mini Cylinder
Mag CETOP RP 43P Steel Body Pneumatic Cylinder
Mag CETOP RP 53P Steel Body Pneumatic Cylinder
Mag CETOP RP 43P Aluminium Body Pneumatic Cylinder
Mag KS (ISO 21287) Series Pneumatic Cylinder
Mag KSD (ISO 21287) Series Pneumatic Cylinder
Mag KNS Series Pneumatic Cylinder
Mag KNSD Series Pneumatic Cylinder
Mag MYS Series Guided Pneumatic Cylinder
Mag LN Series Guides Pneumatic Cylinder
Mag SV1/8 Directional Control Valve