Description: D122F022-A014 ( MOOG
)
MOOG D122F022-A014
Product Name: MOOG D122F022-A014
Product Brand: MOOG
Product Code: D122F022-A014
Product Artikel: MOOG D122F022-A014
The v/P-controller card D122-034-A001 can be used together with
a MOOG servo valve to control the injection cylinder of the plastics
injection molding machines.
It controls:
injection speed
injection pressure limiter
holding pressure
back pressure during plasticizing The setpoints for speeds and pressures, and the process data are
entered via the machine control, making the v/P-controller card an
integral component within the complete machine control and
operation system.
If the machine control system does not include the required supply
voltage (± 15V) for the card, this can be provided by the optional
„DC/DC converterInch at U = 18...36V DC.
This cards needs adaptation to each application. Consult local
Moog office. Technical data:
Board dimensions: Eurocard format 160 x 100mm
Connection: 64-pin male connector, DIN41612 type C
Power supply: ±15VDC, regulated (DC/DC converter available as option)
Ripple ±100mVDC
Current consumption: Idle: ±100mA
Max nominal operation: ±150mA
Logic: optocoupler
velocity: Pin 1 +15V ... +50V
hold pressure: Pin 15 +15V ... +50V
back pressure: Pin 2 +15V ... +50V
screw retract: Pin 14 +15V ... +50V
digital ground Pin 24 0V (DGND)
Input resistance: P-actual: Pin 4 15k
V-actual: Pin 8 100k
V-actual: Pin 9 100k
P-set: Pin 13 100k
V-set: Pin 11 10k
Output amplifier: capable of withstanding short circuits
supply pressure transducer: Pin 3 +5V / +30mA
P-actual: Pin 6 0 ... +10V min. input R = 5k
V-actual: Pin 7 0 ... ±10V min. input R = 5k
position value positive: Pin 10 0 ... ±10V min. input R = 5k
Moog valve saturated: Pin 12 0 ... ±10V min. input R = 5k
Output Amplifier: Pin 16 0 ... ±10V min. input R = 5k
position value negative: Pin 25 0 ... ±10V min. input R = 5k
Permissible ambient temperature: 0 ... 60°C
The in- and outputs are related to analogue ground (pin22)
