industrialmaterialcenter.com

Tecsis F9302 Strain sensor

Tecsis

Numéro de produit: F9302
Fabricant: Tecsis
Confirmed Rating: ☆☆☆☆☆☆ (4.3)
Rating Count: 14051

Veuillez contacter notre équipe d'assistance en direct ou remplir le formulaire d'offre en ligne pour obtenir des informations détaillées sur le produit Tecsis F9302 Tecsis F9302 Strain sensor Nous reviendrons vers vous dès que possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Tecsis F9302 Strain sensor

Description for Tecsis F9302 Strain sensor

Applications of the strain sensor Injection molding machines Presses, stamping and embossing machines Structural steelwork, vessel supports Special vehicles Construction machines Special features of the strain sensor Measuring ranges strains from 0 ... 200 με up to max. 0 ... 1,000 με Good long-term stability, high shock and vibration resistance, good reproducibility As retrofitting, easy to install For use in extreme outdoor applications (IP67) Relative linearity error < 2 % Fnom Description of the strain sensor Strain sensors have been designed for application areas in which there is a need to measure the deformation due to external forces acting on already existing, massive components. The device is simply screwed onto the component. After calibration the unit obtains the characteristics of a force transducer, where the strain is transferred by frictional connection from the component to the strain sensor. Due to the retrospective mounting option described and the low space requirement, this type is a universal, versatile sensor for force and load control. Application examples include large machines and steel constructions, where high loads are determined. This is the case, among others, in machine building for embossing machines and presses. The strain sensor is suitable for use on structures with a tension or compression of max. 1.0 ‰ and achieves an overall accuracy of the measuring unit of 2 % of full scale. Two screws are used to attach it to a region of the structure at which the relevant elongation occurs. The force sensor features an integrated amplifier. The combined deformation body/strain sensor is easy to adjust via control signals. At the heart of the type F9302 strain sensor is a 7 mm thin film sensor. In the most confined space, here a temperature-compensated Wheatstone bridge circuit is implemented. The force sensor fulfils EN 61326 for electromagnetic compatibility (EMC). The digital programmable amplifier permits factory presetting to specific application requirements. If required, you can get a version with measuring range selection. The strain sensor may be used both for static and for dynamic measurement.

Latest Comments for Tecsis F9302 Strain sensor


Autres produits recommandés Tecsis


Tecsis F1112 Hydraulic Compression Force Transducer
Tecsis F3301 Shear Beam
Tecsis F33C1 Shear Beam
Tecsis F33S1 Shear Beam
Tecsis F3833 Bending Beam
Tecsis F3831 Shear Beam
Tecsis F1222 Compression Force Transducer
Tecsis F1224 Miniature Compression Load Cell From 1 kN
Tecsis F1212 Compression Force Transducer
Tecsis F1226 Compression Force Transducer
Tecsis F1101 Hydraulic Compression Force Transducer
Tecsis F1102 Hydraulic Compression Force Transducer
Tecsis F1103 Hydraulic Compression Force Transducer
Tecsis F1106 Hydraulic Compression Force Transducer
Tecsis F1115 Hydraulic Compression Force Transducer
Tecsis F1119 Hydraulic Compression Force Transducer
Tecsis F1122 Hydraulic Compression Force Transducer
Tecsis F1125 Hydraulic Compression Force Transducer