Zpa Pecky MPSED Series Electric Actuator

Zpa Pecky MPSED Series Electric Actuator

Product Name: Zpa Pecky MPSED Series Electric Actuator
Product Brand: Zpa Pecky
Product Code: MPSED
Product Artikel: Zpa Pecky MPSED Series Electric Actuator
ELECTRONIC OUTFIT: Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED . Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer. The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control. The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus. Technical data MPSED Type number 52260 52261 52262 52263 52264 52265 52266   20-125 100 -160 160-320 320-630 630-1250 1250-2000 2500-4000 Tripping force [kN]               Adjusting time [s/90°] 8-63 16-120 16-120 16-120 16-120 45 45 Position-changing velocity [min-1]               [mm/min]               Working stroke [°] 160 160 160 160 160 160 160 [ot]               [mm]               Supply voltage 1x 230 V, 50 Hz ✔             24 V, 50 Hz               1 x 110 V, 50 Hz               3 x 230 / 400 V, 50 Hz ✔ ✔ ✔ ✔ ✔ ✔ ✔ Control Two position On-Off ✔ ✔ ✔ ✔ ✔ ✔ ✔ Three position ✔ ✔ ✔ ✔ ✔ ✔ ✔ Continuous               PROFIBUS ✔             Position sensing Resistance transmitter (R) ✔ ✔ ✔ ✔ ✔ ✔ ✔ Absolute ✔             Current transmitter (I)   ✔ ✔ ✔ ✔ ✔ ✔ Position interrupt ✔ ✔ ✔ ✔ ✔ ✔ ✔ Torque-initated interrupt ✔ ✔ ✔ ✔ ✔ ✔ ✔ Manual actuation ✔ ✔ ✔ ✔ ✔ ✔ ✔ Explosion-proof design               Type of enclosure IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 IP 55 Weight - depending on design (Al/cast iron) and on motor [kg] 26 70 70 120 120 267 267 Usage The MODACT ® MPSED electric lever actuators  are used for remote and automatic control of flaps and louver locks, brush displacement of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable.