Zpa Pecky MPSED Series Electric Actuator
Zpa Pecky
Numéro de produit: MPSED
Fabricant: Zpa Pecky
Confirmed Rating:
☆☆☆☆☆
☆ (3.1)
Rating Count: 2726
Veuillez contacter notre équipe d'assistance en direct ou remplir le formulaire d'offre en ligne pour obtenir des informations détaillées sur le produit Zpa Pecky MPSED Zpa Pecky MPSED Series Electric Actuator Nous reviendrons vers vous dès que possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Zpa Pecky MPSED Series Electric Actuator
Description for Zpa Pecky MPSED Series Electric Actuator
ELECTRONIC OUTFIT:Electro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer.The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.Technical dataMPSEDType number52260522615226252263522645226552266 20-125100 -160160-320320-630630-12501250-20002500-4000Tripping force [kN] Adjusting time [s/90°]8-6316-12016-12016-12016-1204545Position-changing velocity[min-1] [mm/min] Working stroke[°]160160160160160160160[ot] [mm] Supply voltage1x 230 V, 50 Hz✔ 24 V, 50 Hz 1 x 110 V, 50 Hz 3 x 230 / 400 V, 50 Hz✔✔✔✔✔✔✔ControlTwo position On-Off✔✔✔✔✔✔✔Three position✔✔✔✔✔✔✔Continuous PROFIBUS✔ Position sensingResistance transmitter (R)✔✔✔✔✔✔✔Absolute✔ Current transmitter (I) ✔✔✔✔✔✔Position interrupt✔✔✔✔✔✔✔Torque-initated interrupt✔✔✔✔✔✔✔Manual actuation✔✔✔✔✔✔✔Explosion-proof design Type of enclosureIP 55IP 55IP 55IP 55IP 55IP 55IP 55Weight - depending on design (Al/cast iron) and on motor [kg]267070120120267267UsageThe MODACT ® MPSED electric lever actuators are used for remote and automatic control of flaps and louver locks, brush displacement of electric motors and actuation of control elements of heating and air-conditioning systems and other equipment for which they are in respect of their properties suitable.
Latest Comments for Zpa Pecky MPSED Series Electric Actuator
Autres produits recommandés Zpa Pecky