FSG AN-60-P-MH- Series Wind Sensor

FSG

Product number: AN-60-P/MH-2L/F/H/02
Producer: FSG
Confirmed Rating: ☆☆☆☆ ☆☆ (2.1)
Rating Count: 6714

You can fill in the online quotation form or get in touch with Live Support Team for the FSG brand, AN-60-P/MH-2L/F/H/02 product. We will get back to you as soon as possible.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for FSG AN-60-P-MH- Series Wind Sensor

Description for FSG AN-60-P-MH- Series Wind Sensor

AN-60-P/MH-2L/F/H/02 AnemometerWind velocity indicators are used for detecting and in connection with the appropriate indicator, monitoring a maximum wind velocity. They are used mainly in safety and monitoring systems of cranes and excavators.Two models are available. One with pendulum orientation, especially suited for the attachment on jibs of mobile cranes, and a common one, pedestal mounted or mounted on a vertical post.The output signal, being proportional to the wind velocity is taken either from a built-in tachometer generator in form of a voltage or from an optoelectronic impulse transmitter with frequency-current converter in form of a current signal in two-wire technique.For applications in the temperature range down to minus 50 °C there is optionally available for both models a mounting arrangement for a temperature controlled heating device.Cross arms feed-through sleeve and crown are splash-proof, degree of protection IP 65.The Indicatorcontains an electronic LED circular bar graph display with a maximum limiting position contact, adjustable from outside.The measuring value is represented in form of a green bar graph display. By a read-out potentiometer on the front side the limit value mark can be preselected within the chain of diodes. If the green shining actual value display passes over the red shining mark of the preselected limiting value, the colour of the actual value display changes to red. At the same time, the limit value relay switches over and signalises the passing over the maximum value by switching over a floating contact.The switchgearis an electronic comparator, constructed as a plastic casing, surface-type, suitable for screwing or rail mount according to DIN 46 277.For the application range of crane and excavator measuring technique the delivery program contains among other things even additional measuring components, for instance:live ring and rope winch shaft encodersrope length and cable drum transmittersuniaxial and biaxial tilt angle transmittersX/Y-control transmitterspedal actuated control transmittersUp to a maximum of four limit indicators/comparators can be integrated in one casing unit, their switching points can be adjusted separately by means of trimming potentiometers between 0 and 100% of the input quantity. The output signals are available via floating relay contacts.

Latest Comments for FSG AN-60-P-MH- Series Wind Sensor

Other Recommended Products FSG