Description: K3G630-PC08-01 ( Ebmpapst
)
Ebmpapst K3G630-PC08-01 EC Plug Fan
Product Name: Ebmpapst K3G630-PC08-01 EC Plug Fan
Product Brand: Ebmpapst
Product Code: K3G630-PC08-01
Product Artikel: Ebmpapst K3G630-PC08-01 EC Plug Fan
Weight 76 kg Motor size 150 Size 630 mm Rotor surface Painted black Electronics housing material Die-cast aluminum Impeller material Sheet aluminum Support plate material Sheet steel, galvanized Support bracket material Steel, painted black Inlet nozzle material Sheet steel, galvanized Number of blades 7 Direction of rotation Clockwise, viewed toward rotor Degree of protection IP55 Insulation class InchFInch Moisture (F) / Environmental (H) protection class H1 Max. permitted ambient temp. for motor (transport/storage) +80 °C Min. permitted ambient temp. for motor (transport/storage) -40 °C Installation position Shaft horizontal or rotor on bottom; rotor on top on request Condensation drainage holes On rotor side Mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - External release input - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection EMC immunity to interference According to EN 61000-6-2 (industrial environment) EMC interference emission According to EN 61000-6-3 (household environment), on account of the installation conditions, ferritic damping in the cable may be required for the application. Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA Electrical hookup Terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (with customer connection of protective earth) Conformity with standards EN 61800-5-1 / CE Approval UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1
