EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board

EKF

Il codice del prodotto: EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board
Artikelnummer: CCH-MARIACHI
Produttori: EKF
Confirmed Rating: ☆☆☆☆ ☆☆ (2.6)
Rating Count: 12204

Contattate il nostro team per la marca EKF il codice EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board per ulteriori informazioni sul prodotto. Compilate anche un modulo di preventivo online. Ti risponderemo al più presto.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board

Description for EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board

Available as a mezzanine add-on companion board (AKA side board) to the CCG-RUMBA card, the CCH-MARIACHI is provided with various I/O ports. Four different front panel versions are available (see p.12), featuring USB, COM as well as analog and digital audio I/O ports. Optionally, a secondary DVI connector allows for dual screen video operating mode. The companion board shares its front panel typically with the host carrier (8HP front panel width in total). In most cases, the CCH-MARIACHI will be attached on top of the CPU board, which is on the right side when looking at the front panel of the boards while inserted into a CPCI rack. Attachment to the bottom side (left) of the CPU board is possible, however only without the secondary DVI option.As an option, the CCH-MARIACHI is available with a rugged on-board 2.5-inch PATA hard disk (or even Flash) drive. Alternatively, either a CompactFlash card adapter, or an 1.8-inch hard disk can be accommodated as a mezzanine module. In addition an USB SolidState Disk (SSD) module can be mounted either on top or on bottom of the CCH. Another option available is the Trusted Platform Module according to TPM 1.2 for safety critical applications. In addition to its front panel I/O connectors, the CCH-MARIACHI has been designed also for rear I/O and therefore requires a nonbussed single-slot P1/P2 backplane in addition to the CompactPCI bus. However, if solely front panel I/O is needed, the J1/J2 connectors may be omitted as an option.The CCH-MARIACHI communicates with the host CPU by means of three expansion connectors: P-EXP (LPC, USB, HD audio), P-IDE (mass storage I/F), and P-SDVO (secondary digital video output). P-EXP combines several southbridge data channels: The LPC (Low Pin Count) is a multiplexed ISA bus, enabling the super-I/O (SIO) controller chip to emulate the legacy I/O interfaces; among these are the classic parallel (printer), serial (COM) and keyboard/mouse ports. Two USB lines are provided, one assigned to a front panel USB connector, the other to a pin header suitable for on-board attachment of a low profile USB Flash Disk (Solid-State Drive, SSD) module on bottom of the CCH between CPU and mezzanine board. Mounting an USB SSD on top is also possible as a stuffing option if no 2.5-inch hard disk is present. Alternatively the second USB line can be redirected to CPCI rear I/O. The HD Audio interface (AKA Azalia) is used to control the audio codec on the CCHMARIACHI. The SMB (System Management Bus) is an enhanced I2 C interface, enabling the BIOS and OS to gain access to special control functions of a rear I/O device. The Parallel ATA/IDE interface is still essential for embedded applications. Optionally, the CCH-MARIACHI can be equipped with either a CompactFlash mezzanine module, or a robust 2.5-inch hard disk drive, particularly suited for use in a rugged environment. A mezzanine module is also available which carries an 1.8-inch drive (ZIF interface), as an alternative.

Latest Comments for EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board

Altri prodotti consigliati EKF