Hawe DG2M Switch
Hawe
Il codice del prodotto: DG2M Switch
Produttori: Hawe
Confirmed Rating:
☆☆☆☆
☆☆ (2.7)
Rating Count: 13922
Contattate il nostro team per la marca Hawe il codice DG2M Switch per ulteriori informazioni sul prodotto. Compilate anche un modulo di preventivo online. Ti risponderemo al più presto.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Hawe DG2M Switch
Description for Hawe DG2M Switch
Product DescriptionOBSOLETE - Limited inventory, no more will be manufacturedPressure Range: 40-160 BarDesign: Spring loaded piston type pressure switch, zero leakageTemperature: Ambient: approx. -40...+80å¡CPressure fluid: Hydraulic fluid acc. to DIN 51524Viscosity range: min. approx. 4; max. approx. 1500 mm2/secOptimal operation range: approx. 10...500 mm2/secProduct InformationThey are used to issue an electrical switching command or signal for further operations when a predefined pressure value is reached. Different versions (with pressure setting on an adjusting knob, main and secondary switch, screw-on pressure switch) enable their use in a wide range of applications.A design-related difference (hysteresis) of 8... 20% is to be expected between the upper and lower switching point in piston-type pressure switches.In contrast to this, the type DG5E and DG6 electronic pressure switches provide the option to select two independent pressure switching points and/or program or adjust the hysteresis. Type DT is an analogous pressure sensor.Electro-hydraulic pressure switches are devices which close or open electrical contacts when pressurized (DIN ISO 1219-1). They are usually used for all applications where a electrical signal should be triggered whenever the set pressure is achieved or exceeded. This signal may be utilized to start a subsequent operation cycle (operation of a solenoid actuated directional valve) or to stop an operation cycle (cut-off of the pump drive, idle position of a solenoid actuated directional valve).
Latest Comments for Hawe DG2M Switch
Altri prodotti consigliati Hawe