Mts Sensor GBS GBS Position Sensor

Per la marca di Mts Sensor che una Mts Sensor GBS GBS Position Sensor cosi lo rispondiamo subito per le vostre domande se in magazzino oppure la consegna e anche il prezzo. Poi facciamo la consegna in tutto il mondo! Mts, Sensor, Mts Sensor, GBS, Mts GBS, Sensor GBS, Mts Sensor GBS, , Mts , Sensor , Mts Sensor
Si prega di chiedere un'offerta: info@industrialmaterialcenter.com
Il codice del prodotto GB-S
Produttori Mts Sensor

Description: GB-S ( Mts Sensor )

Mts Sensor GBS GBS Position Sensor



Product Name: Mts Sensor GBS GBS Position Sensor
Product Brand: Mts Sensor
Product Code: GB-S
Product Artikel: Mts Sensor GBS GBS Position Sensor
Output Voltage 0…10 VDC and 10…0 VDC (min. load controller: > 5 kΩ) Current 4(0)…20 mA or 20…4(0) mA (min./max. load: 0/500 Ω) Programming Programming of set points using optional accessories 2 Bluetooth® version 2.1 Measured value Position Measurement parameters Resolution 16 bit (minimum 1 µm depending on stroke length) Cycle time Up to 1200 mm: 0.5 ms Up to 2400 mm: 1.0 ms > 2400 mm: 2.0 ms Linearity typ. ≤ ±0.02 % F.S. (minimum ±60 µm) Repeatability typ. ≤ ±0.005 % F.S. (minimum ±20 μm) Operating conditions Operating temperature –40…+90 °C (–40…+194 °F), option –40…+100 °C (–40…+212 °F) Ingress protection IP67 with proper mating connector IP68 for cable outlet Shock test 100 g (single shock) / IEC standard 60068-2-27 Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded) EMC test Electromagnetic emission according to EN 61000-6-4 Electromagnetic immunity according to EN 61000-6-2 The sensor meets the requirements of the EC directives and is marked with Magnet movement velocity Any Design/Material Sensor electronics housing 3 Stainless steel 1.4305 (AISI 303), option: stainless steel 1.4404 (AISI 316L) Sensor rod Stainless steel 1.4306; 1.4307 (AISI 304L), option: stainless steel 1.4404 (AISI 316L) Stroke length 25…3250 mm (1…128 in.) Operating pressure 350 bar, 700 bar peak (at 10 × 1 min) Mechanical mounting Mounting position Any Mounting instruction Please consult the technical drawings and the operation manual (document number: 551511) Electrical connection Connection type Cable outlet 5 pin M12 connector A-coded 6 pin M16 connector Operating voltage +24 VDC (−15 / +20 %) Ripple ≤ 0.28 Vpp Current consumption 100 mA typically dependent on stroke length Dielectric strength 500 VDC (DC ground to machine ground) Polarity protection Up to −30 VDC Overvoltage protection Up to 36 VDC

Altri prodotti consigliati Mts Sensor