Mts Sensor MHRM Mobile Hydraulic Position Sensor
Mts Sensor
Il codice del prodotto: MHRM
Produttori: Mts Sensor
Confirmed Rating:
☆☆☆☆☆☆
(4.2)
Rating Count: 7372
Contattate il nostro team per la marca Mts Sensor il codice MHRM per ulteriori informazioni sul prodotto. Compilate anche un modulo di preventivo online. Ti risponderemo al più presto.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Mts Sensor MHRM Mobile Hydraulic Position Sensor
Description for Mts Sensor MHRM Mobile Hydraulic Position Sensor
OutputSignal characteristic Analog output restricted by noise or A/D converter of control unitVoltage 0.25…4.75 VDC; 0.5…4.5 VDC; 0.25…9.75 VDC; 4.75…0.25 VDC; 4.5…0.5 VDC; 9.75…0.25 VDCCurrent 4…20 mA; 20…4 mAMeasured value PositionMeasurement parametersResolution ±0.1 mm typicalLinearity 0050…0250 mm 0255…2000 mm 2005…2500 mm≤ ±0.1 mm ±0.04 % (F.S.) ≤ ±0.8 mmHysteresis ≤ ±0.2 mmSetpoint tolerance ±2 mmOperating conditionsOperating temperature −40…+105 °CStorage temperature −25…+65 °CHumidity 90 % relative humidity, no condensationIngress protection – M12 connector IP67 / IP69K (correctly fitted)Ingress protection – Sensor housing IP67Shock test (according to EN 50155) According to EN 61373 Cat2 (Bogie) and Cat3 (Axle)Vibration test (according to EN 50155) According to IEC 60068-2-64-Fn Cat3 (Axle)EMC test (according to EN 50155) EN 50121-3-2ISO 14982 Agricultural and forest machinesEN 13309 Construction machinesISO 16750-2Electromagnetic immunity according to EN 61000-6-2Electromagnetic emission according to EN 61000-6-3RF immunity 200 V/m per ISO 11452-2/-4PCB coating According to EN 50155Pressure (according to DIN EN ISO 19879)* Ø 7 mm sensor rod Ø 10 mm sensor rodPN (nominal operating) 300 bar 350 barPmax (max. overload) 400 bar 450 barPstatic (proof pressure) 525 bar 625 barDesign / MaterialHousing lid Compound PBT (glass fiber reinforced plastic); sealing ring: TPUSealing O-ring NBR with back-up ring PTFESensor electronics housing Stainless steel 1.4305 (AISI 303)Sensor rod – Ø 7 mm Stainless steel 1.4301 (AISI 304)Sensor rod – Ø 10 mm Stainless steel 1.4306 (AISI 304L)Stroke length 50…2500 mmMechanical mountingMounting instruction Please consult the technical drawingsMounting position AnyElectrical installationConnector InterConnection plugOperating voltage 12 / 24 VDC (8…32 VDC)24 VDC supply 12 VDC supplyLoad (output mA) RL ≤ 500 Ω RL ≤ 250 ΩLoad (output VDC) RL ≥ 10 kΩ RL ≥ 10 kΩInrush current 4.5 A / 2 ms 2.5 A / 2 msOperating voltage ripple 1 %PPPower drain ≤ 1 WOver voltage protection (VDC-GND) Up to +36 VDCPolarity protection (GND-VDC) Up to −36 VDCInsulation resistance R ≥ 10 MΩ @ 60 sec according to EN 50155Dielectric strength 708 VDC (DC ground to machine ground) according to EN 50155MHRM EMBEDDED – TECHNICAL DATA*/ According to calculations under use of the FKM guidelineCycles Ø 7 mm sensor rod Ø 10 mm sensor rodDynamic pressure: < 2 × 106 pressure cycles 300 bar 350 barStatic pressure: < 2 × 104A pressure cycles 400 bar 450 barProof pressure: Maximum 5 minutes testing time for cylinder pressure test 525 bar 625 bar
Latest Comments for Mts Sensor MHRM Mobile Hydraulic Position Sensor
Altri prodotti consigliati Mts Sensor