Mts Sensor MH200 Mobile Hydraulic Position Sensor

Per la marca di Mts Sensor che una Mts Sensor MH200 Mobile Hydraulic Position Sensor cosi lo rispondiamo subito per le vostre domande se in magazzino oppure la consegna e anche il prezzo. Poi facciamo la consegna in tutto il mondo! Mts, Sensor, Mts Sensor, MH200, Mts MH200, Sensor MH200, Mts Sensor MH200, Mobile
Si prega di chiedere un'offerta: info@industrialmaterialcenter.com
Il codice del prodotto MH200
Produttori Mts Sensor

Description: MH200 ( Mts Sensor )

Mts Sensor MH200 Mobile Hydraulic Position Sensor



Product Name: Mts Sensor MH200 Mobile Hydraulic Position Sensor
Product Brand: Mts Sensor
Product Code: MH200
Product Artikel: Mts Sensor MH200 Mobile Hydraulic Position Sensor
Measured value position Stroke range 2520…5000 mm (in 20 mm steps) Output Signal characteristic analog output restricted by noise or A/D converter of control unit Voltage 0.5…9.5 VDC Current 4…20 mA Resolution 2520…3500 mm ≤ 0.5 mm 3520…5000 mm ≤ 1.0 mm Power up time typ. 250 ms Mounting zone 30 mm Damping 63.5 mm 69.5 mm (M6 female) / 85.5 mm (M8 male) Accuracy Linearity 2520…3500 mm ≤ ±1.0 mm 3520…5000 mm ≤ ±2.0 mm Hysteresis 2520…3500 mm ≤ ±0.5 mm 3520…5000 mm ≤ ±1.0 mm Internal sample rate 2 ms Setpoint tolerance ≤1 mm Operating conditions Mounting position any Operating temperature electronics −40…+105 °C Storage temperature −25…+ 65 °C Fluid temperature −30…+ 85 °C Dew point, humidity EN60068-2-30, 90 % rel. humidity, no condensation Pressure without considering support tube assembly Operating pressure ratings pressure impulse test according DIN EN ISO 19879 (Ø 10 mm pressure pipe) PN 320 bar Pmax 400 bar Pstatic 550 bar IP rating M12 connector EN60529 (IP69K) when plugged Sensor housing EN60529 (IP67) Environmental testing Shock test IEC 60068-2-27, 50 g (11 ms) single shock, 15 g (11 ms) at 1000 shocks per axis Vibration test IEC 60068-2-64, 5 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) - resonance frequencies excluded EMC test ISO 14982 Agricultural and forest machines Immunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI) Emissions: CISPR 25 Transiente Impulses: ISO 7637-1/2 E.S.D.: ISO/TR 10605 Materials and dimensions Pressure pipe (Ø 10 mm) stainless steel 1.4306 / AISI 304L Housing stainless steel 1.4305 / AISI 303 Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFE Support tube stainless steel 1.4301 / AISI 304 Support tube adapter (head/tail) stainless steel 1.4305 / AISI 303 M12 connector insert material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pins M12 flange brass nickel-plated with O-ring 13 × 1.6 NBR 70 Electrical installation Connector M12 male plug Supply voltage 12 VDC (tolerance range 8…32 VDC) 24 VDC (tolerance range 8…32 VDC) Current consumption typ. < 100 mA typ. < 50 mA Load (output VDC) RL> 10 kΩ RL> 10 kΩ Load current (output VDC) typ. 1 mA typ. 1 mA Loud (output mA) RL < 250 Ω RL < 500 Ω Inrush current max. 2.5 A/2 ms max. 4.5 A/2 ms Supply voltage ripple < 1 % p-p Power drain < 1 W Over voltage protection (GND-VDC) up to +36 VDC Polarity protection (GND-VDC) up to −36 VDC Insulation Resistance R ≥ 10 MΩ @ 60 sec Electric strength 500 VDC (DC GND to chassis GND)

Altri prodotti consigliati Mts Sensor