Description: PRF08-C1AM0340 ( SICK
)
SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder
Product Name: SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder
Product Brand: SICK
Product Code: PRF08-C1AM0340
Product Artikel: SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder
PERFORMANCE - PRF Measurement range 0 m ... 3 m Encoder Incremental encoders Resolution (wire draw + encoder) 0.03 mm 1) 2) Repeatability ≤ 1 mm 3) Linearity ≤ ± 2 mm 3) Hysteresis ≤ 2 mm 3) 1) The values shown have been rounded. 2) Example calculation based on the PRF08 with HTL Push Pull: 200 mm (wire draw length per revolution - see Mechanical data): 2,000 (pulses per revolution) = 0.1 mm (resolution of wire draw + encoder combination). 3) Value applies to wire draw mechanism. INTERFACES - PRF Communication interface Incremental / TTL RS-422 Programmable/configurable ✔ Factory setting The built-on DFS60 encoders are programmed to the specified number of lines and interface prior to delivery. The electrical interface (TTL/HTL) and the number of lines (up to max. 10,000 lines) can be set in accordance with customer requirements with our programming devices for DFS60 encoders, which are available separately. ELECTRICAL DATA - PRF Connection type Male connector, M23, 12-pin, radial Supply voltage 10 V ... 32 V Power consumption ≤ 0.7 W (without load) MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 1) 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532. MECHANICAL DATA - PRF Weight 1.8 kg Measuring wire material Highly flexible stranded steel 1,4401 stainless steel V4A Weight (measuring wire) 7.1 g/m Housing material, wire draw mechanism Aluminum (anodized), zinc die cast Spring return force 6 N ... 14 N 1) Length of wire pulled out per revolution 200 mm Life of wire draw mechanism Typ. 1,000,000 cycles 2) 3) Actual wire draw length 3.2 m Wire acceleration 40 m/s² Operating speed 8 m/s Mounted encoder DFS60, DFS60B-S1MA10000, 1056866 Mounted mechanic MRA-F080-103D2, 6030125 1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures. 2) Average values, which depend on the application. 3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration. AMBIENT DATA - PRF EMC According to EN 61000-6-2 and EN 61000-6-3 Enclosure rating IP64 Operating temperature range –30 °C ... +70 °C CLASSIFICATIONS ECl@ss 5.0 27270590 ECl@ss 5.1.4 27270590 ECl@ss 6.0 27270590 ECl@ss 6.2 27270590 ECl@ss 7.0 27270590 ECl@ss 8.0 27270590 ECl@ss 8.1 27270590 ECl@ss 9.0 27270590 ECl@ss 10.0 27270613 ECl@ss 11.0 27270503 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113
