SKF SLC Series Metering Device

SKF SLC Series Metering Device

Product Name: SKF SLC Series Metering Device
Product Brand: SKF
Product Code: SLC Series
Product Artikel: SKF SLC Series Metering Device
For use in single-line lubrication systems The SKF Lincoln SLC metering device is designed for use in high-pressure single-line lubrication systems and features a modular design. Also, delivery volume can be adjusted via metering screws, helping to ensure each lubrication point receives the required amount of lubricant. Featuring a spring-reset control piston, the metering device has a high venting capability compatible with greases up to NLGI 2. The SLC offers easy configuration to meet your needs, including different output quantity, fitting and adjustment options.  With the most compact construction in its class, the SLC is suitable for many applications in renewable energy, construction, mining as well as in heavy industry. Features and benefits High venting capability Wide delivery volume range Compact construction  Easy to monitor and maintain Simplified failure analysis  Reduced risk of leaks Reliable operation in harsh conditions with a wide operating temperature range  Patented design and functionality Easy to clean  applications Renewable energy  Construction and mining Heavy industry Similar features SLC1 and SLC2 Function principle Single-line metering device with spring loaded control pistons and double acting delivery pistons Lubricant Grease up to NLGI 2 Operating temperature –40 to +100 °C –40 to +212 °F System pressure 150–315 bar 2 150–4 600 psi Relief / venting pressure max. 68 bar max. 990 psi Lubricant inlet connection G3/8 or 3/8Inch NPTF Lubricant inlet fittings for tube O.D. 8, 10, 12 mm or 1/4, 3/8, 1/2Inch Material Steel Corrosion protection class (DIN EN ISO 12944) C3 Mounting position any, preferable vertical Varying features SLC1 SLC2 Number of lubricant outlets 1–12 1–6 Delivery volume per outlet and stroke Pre-set 0,1; 0,15; 0,2; 0,25; 0,3; 0,4; 0,5; 0,6; 0,7 cm³ 0.0061; 0.0091; 0.012; 0.015; 0.018; 0.024; 0.03; 0.036; 0.043 in³ 0,2 ; 0,3; 0,4; 0,5; 0,6; 0,8; 1,0; 1,2; 1,4 cm³ 0.012 ; 0.018; 0.024; 0.03; 0.036; 0.049; 0.06; 0.073; 0.085 in³ Adjustable 0,1–0,7 cm³ 0.0061–0.043 in³ 0,2–1,4 cm³ 0.012–0.085 in³ Lubricant outlet connection 6 mm 1/4Inch OD 6, 8, 10, 12 mm 1/4, 3/8 or 1/2Inch OD Outlet thread G1/4 or 1/4Inch NPTF Dimensions 12 outlet basic version 6 outlet basic version 144 × 135 × 50 mm 5.67 × 5.31 × 1.97 in. 169 × 132 × 40 mm 6.65 × 5.2 × 1.57 in. Visual memory indicators Function principle Magnetic based reset indicator with red fault indicating ring and plastic protection cap Material Stainless steel Operating temperature –20 to +70 °C –4 to +158 °F Electrical performance indicators Function principle Electronic piston detector Material Stainless steel Corrosion protection class (DIN EN ISO 12944) C5 Operating temperature –40 to +85 °C  (–40 to +185 °F) Design 3 wire DC PNP, 2 wire DC PNP/NPN Output function NO-contact Operating voltage 10–36 DC, supply class 2 per cULus Protection class IP65 Power consumption max. 5 mA Connection M12x1-4 pole Standard CE, UL, CSA, E1 Order example The product can be configured using a configuration code. The order example shows one possible part number and its explanation. SLC1G3B-1RGBBR-EXM Metering device SLC Design size 1 BSP thread for metric tubing  Corrosion class C3  With four fixed metering screws and two adjustment screws at top and 6 visual indicators at bottom  Number of sections: 6 Metering volume per stroke, in total 11 outlets Section 1: 0,2 cm³  (0.012 in³)  (cross-porting 2x0,1 cm³  (2x0.0061 in³)  Section 2: 0,1–0,7 cm³  (0.0061–0.043 in³)  Section 3: 0,4 cm³  (0.024 in³)   Section 4: 0,1 cm³  (0.0061 in³)   Section 5: 0,1 cm³  (0.0061 in³)   Section 6: 0,1–0,7 cm³  (0.0061–0.043 in³) Lubricant inlet connection left: Straight fitting for tube ∅10 mm, joint with EO2  Lubricant inlet connection right: closed  Lubricant outlet connection: 11 tube ∅6 mm, plug-in type, (5 odd outlets with extension) You can configure the product using the CAD configurator below. This will give you a specific order number. The product can be configured using a configuration code. The order example shows one possible part number and its explanation. SLC1G3B-1RGBBR-EXM Metering device SLC Design size 1 BSP thread for metric tubing  Corrosion class C3  With four fixed metering screws and two adjustment screws at top and 6 visual indicators at bottom  Number of sections: 6 Metering volume per stroke, in total 11 outlets Section 1: 0,2 cm³  (0.012 in³)  (cross-porting 2x0,1 cm³  (2x0.0061 in³)  Section 2: 0,1–0,7 cm³  (0.0061–0.043 in³)  Section 3: 0,4 cm³  (0.024 in³)   Section 4: 0,1 cm³  (0.0061 in³)   Section 5: 0,1 cm³  (0.0061 in³)   Section 6: 0,1–0,7 cm³  (0.0061–0.043 in³) Lubricant inlet connection left: Straight fitting for tube ∅10 mm, joint with EO2  Lubricant inlet connection right: closed  Lubricant outlet connection: 11 tube ∅6 mm, plug-in type, (5 odd outlets with extension) You can configure the product using the CAD configurator below. This will give you a specific order number.