Zpa Pecky MOPED Series Electric Actuator

Zpa Pecky

Il codice del prodotto: MOPED 52 039
Produttori: Zpa Pecky
Confirmed Rating: ☆☆☆☆☆☆ (4.8)
Rating Count: 14745

Contattate il nostro team per la marca Zpa Pecky il codice MOPED 52 039 per ulteriori informazioni sul prodotto. Compilate anche un modulo di preventivo online. Ti risponderemo al più presto.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Zpa Pecky MOPED Series Electric Actuator

Description for Zpa Pecky MOPED Series Electric Actuator

Electronic outfitElectro-mechanical control board is replaced with the electronic system DMS2 or DMS2 ED. Both systems scan position of the output shaft and torque of the electric actuator by contact-free magnetic sensors. The sensor of the output shaft position is absolute and does not require any backup power supply in case supply voltage is disconnected during operation of the electric actuator. Both systems can be set and monitored by a computer with controlling programme or manually without a computer. The more simple system DMS2 ED substitutes electromechanical parts and/or provides for controlling the electric actuator by input analog signal as in the version Control.The system DMS2 enables the electric actuator to be used for two-position and three-position regulation or to be connected to the industrial bus bar Profibus.Technical dataMOPEDType number5203052031520325203352034520355203652039 20-12563-160160-250 250-500320-630630-12001000-250010-60Tripping force [kN]        Adjusting time [s/90°]        Position-changing velocity[min-1]7-807-1457-14516-10016-6345-10020-409-40[mm/min]        Working stroke[°]        [ot]2-20102-14202-14202-10902-10902-10902-4701,5-2880[mm]        Supply voltage1x 230 V, 50 Hz       ✔24 V, 50 Hz        1 x 110 V, 50 Hz        3 x 230 / 400 V, 50 Hz✔✔✔✔✔✔✔✔ControlTwo position On-Off✔✔✔✔✔✔✔✔Three position✔✔✔✔✔✔✔✔Continuous        PROFIBUS✔✔✔✔✔✔✔✔Position sensingResistance transmitter (R)        Absolute✔✔✔✔✔✔✔✔Current transmitter (I)        Position interrupt✔✔✔✔✔✔✔✔Torque-initated interrupt✔✔✔✔✔✔✔✔Manual actuation✔✔✔✔✔✔✔✔Explosion-proof design        Type of enclosureIP 67IP 67IP 67IP 67IP 67IP 67IP 67IP 67Weight - depending on design (Al/cast iron) and on motor [kg]27-2841-5445-5490-9797-99206-211304-30917UsageThe electric actuators MODACT ® MOPED are designed for shifting valves and/or other elements for which they are suitable with their reversible rotary motion. Other using than that for controlling valves should be discussed with the manufacturer. The actuators can operate in circuits of remote control. The actuators can also operate in circuits of automatic regulation with the regime S4 – 25 %; 1200 h-1.

Latest Comments for Zpa Pecky MOPED Series Electric Actuator

Altri prodotti consigliati Zpa Pecky