Ayvaz DBV-10 Boiler Automatic Bottom Blowdown System
Ayvaz
제품 번호: DBV-10
프로듀서: Ayvaz
Confirmed Rating:
☆☆☆☆☆☆
(4.4)
Rating Count: 6021
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Ayvaz 브랜드, DBV-10 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Ayvaz DBV-10 Boiler Automatic Bottom Blowdown System
Description for Ayvaz DBV-10 Boiler Automatic Bottom Blowdown System
The formation of hard accumulation in boilers (stone and mud ) is caused by some impurities and corrosion products contained in water. Examples of water impurities are; dissolved calcium, magnesium chloride, sulfate and silicon elements; Examples of corrosion products include iron and copper. The water impurities in the boiler consist of condensate leaks and boiler feed water (make-up); Corrosion products, as a result of corrosion, also comes from the condensate and feed water.Deposits cause a waste of fuel in the boiler, a slight decrease in productivity, and more importantly, overheating occurs metal annealing and pipe explosion. The boiler zone where the accumulation causes the biggest problem is the evaporator pipes around the burners in the combustion chamber. The system that is used to prevent the problems caused by these hard accumulation compounds and to expurge hard materials from the boiler is called Boiler Automatic Bottom Blowdown SystemsACCUMULATION (STONE) TYPESCalcium carbonate (the most common type of stone), calcium sulfate, silica, phosphate stones, magnesium and magnesium stones, aluminum, iron oxides (usually in the boiler and condensate line is the product of corrosion).ACCUMULATION EFFECTSReduced thermal conductivity: stones are poor heat conductors and act as insulators as indicated by the various conductivity values. The resulting furring layer causes the reduction of steam generation. In addition, the resulting furring layer increases the fuel consumption and increases the unit cost of steam generation.Temperature build-up in the metal wall: As a stone-coated wall prevents heat transfer, the wall temperature rises. This is called overheating and the metal may lose some of its mechanical properties (elasticity, etc.). These cause local shape disturbances and cause pipe explosion.Blowdown Systems Components-BLOWDOWN VALVE V-3F-Body and Cover : AISI 304 Stainless Steel(Opt. AISI 316) Working Temperature : -50 / +210°CPressure Class : PN40
Latest Comments for Ayvaz DBV-10 Boiler Automatic Bottom Blowdown System
기타 추천 제품 Ayvaz