Ayvaz KKS-10 Condensate Pollution Control System
Ayvaz
제품 번호: KKS-10
프로듀서: Ayvaz
Confirmed Rating:
☆☆☆☆☆☆
(4.2)
Rating Count: 6053
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Ayvaz 브랜드, KKS-10 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Ayvaz KKS-10 Condensate Pollution Control System
Description for Ayvaz KKS-10 Condensate Pollution Control System
In order for a steam installation to work efficiently, the condensate which is going to the boiler feed tank must be inmaximum quantity and clean.Any drilling of the heating coil or plate in the steam lines causes the heated fluid to mix into the condensate water. Polluted condensate will cause accumulation of sediments on the heating surfaces, corrosion and, more importantly, contamination of the boiler feedwater will lead to a reduction in boiler life, as well as a decrease in capacity efficiency. For this reason, the pollution we may occur in the condensate that must be detected immediately.Working Principle:This system, which is located at the entrance of the condensate tank, continuously measures the electrical conductivity of the condensate water. The conductivity measurement probe value is transmitted at the system control value. The controller compares the set conductivity value with the set value. When the set value is exceeded, the discharge valve opens and the condensate is discharged.When the electric conductivity value is lower than the set value, the discharge valve closes and the condensate tank line is opened. It is sent to the condensate tank.Since the electrical conductivity varies with temperature, the conductivity probe used in the system must be able to measure the conductivity at the temperature together with the conductivity so that the conductivity of the condensate at every temperature can be measured accurately.
Latest Comments for Ayvaz KKS-10 Condensate Pollution Control System
기타 추천 제품 Ayvaz