industrialmaterialcenter.com

EKF CCA-LAMBADA I/O Companion Board

EKF

제품 번호: EKF CCA-LAMBADA I/O Companion Board
Artikelnummer: CCA-LAMBADA
프로듀서: EKF
Confirmed Rating: ☆☆☆☆☆☆ (4.1)
Rating Count: 3147

온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. EKF 브랜드, EKF CCA-LAMBADA I/O Companion Board 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for EKF CCA-LAMBADA I/O Companion Board

Description for EKF CCA-LAMBADA I/O Companion Board

Available as a companion board to the CC9- SAMBA CPU card, the CCA-LAMBADA is provided with common legacy I/O ports. Interconnection between the CCA I/O module and the CPU carrier board is achieved by the expansion connector, which incorporates e.g. the LPC (Low Pin Count) and AC'97 (audio) interface. As an option, the CCA-LAMBADA is available with a rugged on-board 2.5-inch hard disk drive (1.8-inch as a mezzanine module). The CCA-LAMBADA can be attached either left or right (bottom or top) to the CPU board, and is provided typically with a 4HP front panel. In addition to its front panel I/O connectors, the CCA-LAMBADA has been designed also for rear I/O and therefore requires a non-bussed singleslot P1/P2 backplane in addition to the CompactPCI bus. However, if front panel I/O is solely needed, the J1/J2 connectors may be omitted as an option.The CCA-LAMBADA communicates to the host CPU by means of the expansion connector, which incorporates the LPC and AC'97 interfaces. The LPC (Low Pin Count) is a multiplexed ISA bus, enabling the super-I/O controller chip to emulate the legacy I/O interfaces. Among these are parallel and serial ports, the PS/2 interfaces, and last not least the classic 1.4/2.8MB floppy disk controller. The AC'97 interface is used for control of an optional audio codec on the CCA-LAMBADA. By connecting the boards together, the hosts ATA/IDE secondary interface is also available on the CCA-LAMBADA. Optionally, the board can be equipped with either a CompactFlash mezzanine module, or a robust 2.5-inch hard disk drive, particularly suited for use in a rugged environment. A mezzanine module will be also available which carries an 1.8-inch drive, as an alternative. The CCA-LAMBADA can be mounted either on the left (bottom) side of the CPU board, or right (top) side. Specify your actual needs when ordering the unit.

Latest Comments for EKF CCA-LAMBADA I/O Companion Board


기타 추천 제품 EKF


EKF SRS-12xx-BLUBRICK Rugged Wall-Mount Box
EKF C20-SATA Dual-Drive Mezzanine Module
EKF C40-SCFA Compact Flash Mezzanine Module
EKF C32-FIO Front Panel I/O Expansion Board
EKF CCT-RIO Rear I/O Transition Module
EKF PC1-GROOVE Compact PCI PlusIO CPU Card
EKF SC1-ALLEGRO Compact PCI Serial CPU Card
EKF C15-DON Mezzanine Module Side Board
EKF CCE-PUNK I/O Companion Board
EKF CP5-GLAM Compact PCI New Technologies Carrier Board
EKF CCH-MARIACHI Compact PCI Mezzanine I/O Companion Board
EKF CCA-LAMBADA I/O Companion Board
EKF CRB-BLUELINE 3U CompactPCI Small Systems
EKF CU8-RS232 ESD Protected RS-232 Rear-I/O Module
EKF CB2-PIPE 3U, CompactPCI 5-Port USB 2.0 Host Controller
EKF CL1-COMBO 5+1 Ports Gigabit Ethernet Switch
EKF CL2-BRASS 5+1 Ports Gigabit Ethernet Switch
EKF CN7-REVERB 5-Port Gigabit Ethernet Hostadapter