Gestra SRL63A

Gestra

제품 번호: SRL63A
프로듀서: Gestra
Confirmed Rating: ☆☆☆☆☆☆ (4.4)
Rating Count: 4869

온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Gestra 브랜드, SRL63A 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Gestra SRL63A

Description for Gestra SRL63A

Description For the installation of low-level limiters of “high-integrity design” in measuring pots mounted outside of the boiler, it is imperative that the periodic purging of the connecting lines to the boiler be monitored properly. To achieve this, the connecting lines are shut off one after the other at defined intervals and the measuring pot is drained. The logic unit SRL 63 monitors compliance with the preset times and the sequence of valve operations; in addition, it bypasses the low-level limiter to ensure that the system is not shut down during purging. The logic unit for monitoring the purging cycle consists of a compact PLC, a safety time-lag relay and a coupling relay. The design complies with EN 50156Function The logic unit monitors the following times: ■ Interval time: This is the time interval at which, depending on the mode (24h / 72h operation), the connecting lines have to be purged. ■ Standby period: The purging process must be initiated during this time. The standby period begins when the interval time has elapsed. ■ Purging time: During this period, the purging process must be performed through actuation of the valves. Actuation of the valves is signalled by means of the limit switches; similarly, when the electrode of the low-level limiter is exposed, this is sensed through the output contact of the corresponding level switch. If a signal is not received within the purging time, the safety circuit is opened. Since a low-level limiter may be bypassed for a maximum of 5 minutes, monitoring of the purging time is a safety-relevant function. 

Latest Comments for Gestra SRL63A

기타 추천 제품 Gestra