Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Gestra
제품 번호: UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
프로듀서: Gestra
Confirmed Rating:
☆☆☆☆☆☆
(4.8)
Rating Count: 1857
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Gestra 브랜드, UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Description for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Description Float traps type UNA 45 are designed for removing condensate from steam or compressed air. Float traps type UNA 46 and UNA 46A are designed for removing condensate from steam or other gases / gas mixtures. Equipment fitted with control unit SIMPLEX and SIMPLEX-P is operated and controlled by the float and the rolling ball. Equipment with this type of control unit is particularly suitable for cold condensate and cold distillates. The rolling ball of the control unit SIMPLEX-P is made of Perbunan® rubber, which ensures tight shut-off of the seat. Equipment with control unit DUPLEX may also be used for air venting the installation. This type of control unit is particularly suitable for saturated steam systems. The control unit DUPLEX consists of a float operated rolling ball valve and a temperature dependent air-venting facility. Do not expose the membrane regulator capsule of the DUPLEX control unit to superheat conditions above 5 K. By means of the externally adjustable internal bypass it is possible to adjust a bypass passage that flows past the control unit. The equipment must only be used within the allowable pressure and temperature limits and only if the chemical and corrosive influences on the equipment are taken into account.
Latest Comments for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
기타 추천 제품 Gestra