Hawe DG35Y8 Pressure

Hawe

제품 번호: DG35Y8 Pressure
프로듀서: Hawe
Confirmed Rating: ☆☆☆☆☆☆ (4.3)
Rating Count: 11371

온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Hawe 브랜드, DG35Y8 Pressure 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Hawe DG35Y8 Pressure

Description for Hawe DG35Y8 Pressure

Product DescriptionPressure Range: 4-50 BarDesign: Spring loaded piston type pressure switch, zero leakageTemperature: Ambient: approx. -40...+80°CPressure fluid: Hydraulic fluid acc. to DIN 51524Viscosity range: min. approx. 4; max. approx. 1500 mm2/secOptimal operation range: approx. 10...500 mm2/secProduct InformationThey are used to issue an electrical switching command or signal for further operations when a predefined pressure value is reached. Different versions (with pressure setting on an adjusting knob, main and secondary switch, screw-on pressure switch) enable their use in a wide range of applications.A design-related difference (hysteresis) of 8... 20% is to be expected between the upper and lower switching point in piston-type pressure switches.In contrast to this, the type DG5E and DG6 electronic pressure switches provide the option to select two independent pressure switching points and/or program or adjust the hysteresis. Type DT is an analogous pressure sensor.Electro-hydraulic pressure switches are devices which close or open electrical contacts when pressurized (DIN ISO 1219-1). They are usually used for all applications where a electrical signal should be triggered whenever the set pressure is achieved or exceeded. This signal may be utilized to start a subsequent operation cycle (operation of a solenoid actuated directional valve) or to stop an operation cycle (cut-off of the pump drive, idle position of a solenoid actuated directional valve).

Latest Comments for Hawe DG35Y8 Pressure

기타 추천 제품 Hawe