Mag CETOP RP 53P Steel Body Pneumatic Cylinder
Mag
제품 번호: CETOP RP 53P
프로듀서: Mag
Confirmed Rating:
☆☆☆☆
☆☆ (2.1)
Rating Count: 10578
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Mag 브랜드, CETOP RP 53P 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Mag CETOP RP 53P Steel Body Pneumatic Cylinder
Description for Mag CETOP RP 53P Steel Body Pneumatic Cylinder
Specifications» Assembly dimensions and mounting types meet CETOP RP53P standards. » 8 standard mounting types. » Piston diameter: 125 mm -320 mm » Piston rod diameter: 32 mm - 63 mm » Stroke length up to 2000 mm» With optional stroke end adjustable cushioning version » With optional double rod versionTechnical Specifications Standards:Assembly dimensions and mountings meet CETOP RP53P standardPiston diameter and piston rod diameter comply with ISO 3320 standardTest standard is ISO 10099.Maximum Operating Pressure: 10 Bar (1 MPa) Fluid Type: Filtered dry or lubricated compressed air. If oil lubricated air will be used, it is recommended to use MAG special air preparation oil.Operating Temperature: -20 °C to +80 °C.Optionally, it can be manufactured with an operating temperature between -30 °C and +200 °C.Piston Speed: Maximum 1 m/s.System cleanliness: Particle size in compressed air should be maximum 50 µm.Application Conditions: » Movement axes and connection points of pneumatic cylinder and piston rod should be mechanically aligned. Any lateral loads to piston rod and piston bearings should be avoided. » Buckling length and buckling load of piston rod and/or pneumatic cylinder should be considered. » Maximum operating pressure should be complied at each operation of pneumatic cylinder. » Adverse effects such as aggressive fine particles, vapours, high temperature and compressed air contamination should be avoided. Materials: Cylinder tube is manufactured from St 52 material.Piston rod is manufactured from Ck45 material with a surface plated with minimum 20 µm hard chrome at f7 tolerance. Front and rear covers are manufactured from GGG 40 cast iron.Test: Each cylinder is subjected to internal and external leak tightness test in accordance with MAG standards and ISO 10099 standards before being shipped. Warranty and Service:MAG NS series cylinders are under the warranty of our company for 2 years. Also, service and spare part support is provided for 10 years. Service and repair activities are performed by MAG personnel. In the cases of any damage which may occur during assembly of the product to system and any intervention on product made by persons other than MAG personnel for the purpose of repair and maintenance, the warranty of product is cancelled. You can contact with us for your requests for any kinds of special design cylinders.
Latest Comments for Mag CETOP RP 53P Steel Body Pneumatic Cylinder
기타 추천 제품 Mag