Meggitt Vibro-Meter IPC704 Signal Conditioner
Meggitt
제품 번호: Vibro-Meter IPC704
프로듀서: Meggitt
Confirmed Rating:
☆☆☆☆
☆☆ (2.7)
Rating Count: 14229
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Meggitt 브랜드, Vibro-Meter IPC704 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Meggitt Vibro-Meter IPC704 Signal Conditioner
Description for Meggitt Vibro-Meter IPC704 Signal Conditioner
Signal conditioner for use with accelerometers (CA) and dynamic pressure sensors (CP).The IPC704 signal conditioner is a high-quality, high-reliability charge-converter for use with piezoelectric sensors: CA accelerometers and CP dynamic pressure sensors.The IPC704 is highly configurable (transfer function with optional integration, input and output sensitivities, high-pass and low-pass filtering), and provides either a current output or a voltage output. It is available in two versions for sensors using different piezoelectric materials (that is, standard piezoelectric material or GaPO4 piezoelectric material).The IPC704 is designed and built for long-term use in environments characterised by hazardous areas (potentially explosive atmospheres).Note: The IPC704 signal conditioner is being replaced by the IPC707 signal conditioner.FeaturesSignal conditioning for CA accelerometers and CP dynamic pressure sensorsVery wide frequency range (0.5 to 20000 Hz) with configurable high-pass and low-pass filtersConfigurable transfer function (input sensitivity, output sensitivity and units), with optional integrator to provide a velocity outputCurrent output for signal transmission over long distances or voltage output for signal transmission over short distancesCertified for use in potentially explosive atmospheres PARAMETER VALUE (IMPERIAL | METRIC) Output type Current (2-wire) or voltage (3-wire) Measurement system CA vibration or CP dynamic pressure Sensor CA accelerometers or CP dynamic pressure sensors Sensitivity See transfer function characteristics and curves in data sheet Frequency range 0.5 to 20000 Hz Linearity ≤0.2% Operating temperature range −22 to 185 °F | −30 to 85 °C Protection rating IP40 Hazardous area certifications Ex ia, Ex ib, Ex nA, AEx nA
Latest Comments for Meggitt Vibro-Meter IPC704 Signal Conditioner
기타 추천 제품 Meggitt