Tecsis EZE15 Aluminium Diecast Housing
Tecsis
제품 번호: EZE15
프로듀서: Tecsis
Confirmed Rating:
☆☆☆☆☆
☆ (3.9)
Rating Count: 2218
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Tecsis 브랜드, EZE15 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Tecsis EZE15 Aluminium Diecast Housing
Description for Tecsis EZE15 Aluminium Diecast Housing
Strain gauge amplifiers are used to transform the mV/V output-signals of strain gauges in amplified signals with a higher fault resistance. By the use of an amplifier it is also possible to connect sensors to displays and controlling units with the need for an amplified signal. The model EZE15X004 is provided with a very robust housing and two mounting bores in the housing allow to mount the amplifier at fitting locations. The die casting housing is designed for harsh environments according to protection class IP 67.FeaturesStrain gauge amplifier in robust field housing Outputsignals 0/4...20mA or 0...±10 V or 0...±5 V (3-Wire) Accuracy 0.02% of full scale Limit frequency up to 1kHz (-3db) for dynamic applications Also available with 5 KHz (-3db) or 10 kHz (-3db) (optional)Needed power supply 16-32 VDC (optional 8-16 VDC)Can be used with load cells with 100% Control-shuntCompact designZero point, span and filter arbitrary adjustableSmall design Protection class IP 67 ApplicationIn combination with force transducers or load cells the strain gauge amplifier EZE15X004 can be used in applications to measure forces or in industrial weighing. It is possible to connect all kinds of strain gauges with an output signal between 0.9 mV/V up to 3 mV/V. The internal sensor supply can be chosen by a switch and is either 5 or 10 VDC. Usually the amplifier is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. Because of the 3-wire analogue output with 4...20 mA, 0...10 V or 0...5 V and the needed supply energy for the amplifier between 16 and 36 V it is possbile to connect the amplifier directly to PLC. Those normaly come with matching analogue inputs which offer a supply energy of 24 V. There is also a version available which needs a supply energy between 8-16 VDC (not available for outputsignal 0...10 V).
Latest Comments for Tecsis EZE15 Aluminium Diecast Housing
기타 추천 제품 Tecsis