Zpa Pecky KP MIDI Electric Actuator
Zpa Pecky
제품 번호: KP MIDI
프로듀서: Zpa Pecky
Confirmed Rating:
☆☆☆☆☆
☆ (3.5)
Rating Count: 9292
온라인 견적 양식을 작성하거나 라이브 지원팀에 연락하여 다음과 같이 문의할 수 있습니다. Zpa Pecky 브랜드, KP MIDI 제품입니다. 최대한 빠른 시일 내에 연락드리겠습니다.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for Zpa Pecky KP MIDI Electric Actuator
Description for Zpa Pecky KP MIDI Electric Actuator
Rotary single-revolution electric actuators for ball cocks and flaps. KP MIDIThe KP MIDI (KP MIDI Control) electric actuators consist of the following basic units:-reversible synchronous motor with a permanently connected starting capacitor -power gearing with a shaft, fitted with a square s = 14 mm -electric outfitThe power gearing consists of a pinion attached to the output shaft of the electric motor, spur gearings and a geared wheel coupled with the output shaft of the electric actuator. The output shaft is fitted with a square s = 14 mm providing for connection to the driven shaft of valve. For control of the position-limit and signalling switches, adjustable cams are fitted at the other end of the output shaft, which is extended in length into the actuator control part.Electric outfit consists of four microswitches of which two are used for tripping the actuator when the end positions of the output shaft have been reached and two can be used for the position signalling of the output shaft.Outlets of the micro-switches and electric motor are connected to a terminal board which serves for electric connection of the actuator to external circuits by means of a cable with conductors of maximum cross-section 1.5 mm².For sealing of inlet cables, the actuator is fitted with two cable bushings. Protection against shock voltage is provided for by internal protective terminal. The actuators can be fitted with anti-condensation heater.Te Technical DataKP MIDIType number52 999Tripping torque [Nm]30Tripping force [kN] Adjusting time [s/90°]13Adjusting speed[min-1] [mm/min] Working stroke[°]320[ot] [mm] Supply voltage1x 230 V, 50 Hz✔24 V, 50 Hz✔1 x 110 V, 50 Hz 3 x 400 V, 50 Hz ControlTwo position On-Off✔Threeposition Continuous PROFIBUS Position sensingResistance transmitter (R) Current transmitter (I) Position interrupt✔Torque-initated interrupt Manual actuation✔Explosion-proof design Type of enclosureIP 67Weight - depending on design (Al/cast iron) and on motor [kg]2U UsageThe KP MIDI electric actuators have been specially designed for actuating valves (ball and flap valves), louvers, air flaps and other devices for which they are in respect of their characteristics suitable.
Latest Comments for Zpa Pecky KP MIDI Electric Actuator
기타 추천 제품 Zpa Pecky