Mts Sensor MS Mobile Hydraulic Position Sensor
Product Name: Mts Sensor MS Mobile Hydraulic Position Sensor
Product Brand: Mts Sensor
Product Code: MS
Product Artikel: Mts Sensor MS Mobile Hydraulic Position Sensor
Input Measured value Position Stroke range 50…2500 mm (in 5 mm steps) Output Signal characteristic Analog output restricted by noise or A/D converter of control unit Voltage 0.25…4.75 VDC / 0.5…4.5 VDC Current 4…20 mA Resolution Typ. 0.1 mm Power up time Typ. 250 ms Mounting zone 22 mm Damping 36.5 / 63.5 mm Accuracy Linearity 0050…0250 mm ≤ ±0.1 mm, 0255…2000 mm ±0.04 % (F.S.), 2005…2500 mm ≤ ±0.8 mm Repeatability ± 0.1 mm Internal sample rate 2 ms Setpoint tolerance ≤ 1 mm Operating conditions Mounting position Any Operating temperature electronics −40…+105 °C Storage temperature −25…+ 65 °C Fluid temperature −30…+ 85 °C Dew point, humidity EN60068-2-30, 90 % rel. humidity, no condensation Pressure Operating pressure ratings Pressure impulse test according DIN EN ISO 19879 Pressure Pipe Ø 7 mm Nominal operating pressure (Pn) 300 bar Max. overload pressure in cylinder (Pmax) 400 bar Max. static proof pressure in cylinder (Pproof) 525 bar IP rating M12 connector EN60529 (IP69K) when plugged Sensor housing EN60529 (IP67) Environmental testing Shock test IEC 60068-2-27, 100 g (11 ms) single shock, 50 g (11 ms) at 1000 shocks per axis Vibration test IEC 60068-2-64, 15 g (r.m.s.) Ø 7 mm pressure pipe (10…2000 Hz) – resonance frequencies excluded EMC test & evaluation ISO 14982 Agricultural and forest machines EN 13309 Construction machines Immunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI) Emissions: CISPR 16 Transiente Impulses: ISO 7637-2 E.S.D.: ISO/TR 10605 Materials and dimensions Pressure pipe Stainless steel 1.4306 / AISI 304L Housing Stainless steel 1.4305 / AISI 303 Sealing O-ring 23.47 ×2.62 mm NBR; Backup Ring 28 × 2 × 1.4 mm, Parker Parbaks 8-119 N1444-90 or 8-119 N0300-90 M12 connector insert Material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pins M12 flange Brass nickel-plated with O-ring 13 × 1.6 NBR 70 Electrical installation Connector M12 male plug or cable assembly Supply voltage 12 VDC (8…32 VDC) 24 VDC (8…32 VDC) Current consumption Typ. < 100 mA Typ. < 50 mA Load (output VDC) RL> 10 kΩ RL> 10 kΩ Load current (output VDC) Typ. 0.5 mA Typ. 0.5 mA Loud (output mA) RL < 250 Ω RL < 500 Ω Inrush current Max. 2.5 A/2 ms Max. 4.5 A/2 ms Supply voltage ripple < 1 % p-p Power drain < 1 W Over voltage protection (GND-VDC) Up to +36 VDC Polarity protection (GND-VDC) Up to −36 VDC Insulation Resistance R ≥ 10 MΩ @ 60 sec Electric strength 500 VDC (DC GND to chassis GND)
