industrialmaterialcenter.com

Dwyer 2010D Magnehelic Differential Pressure Gage

Dwyer

Номер продукта: 2010D Magnehelic Differential Pressure Gage
Продюсер: Dwyer
Confirmed Rating: ☆☆☆☆☆☆ (4.8)
Rating Count: 1980

Вы можете заполнить форму онлайн-предложения или связаться со службой поддержки в режиме реального времени для получения информации. Dwyer бренд, 2010D Magnehelic Differential Pressure Gage продукт. Мы свяжемся с вами как можно скорее.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Dwyer 2010D Magnehelic Differential Pressure Gage

Description for Dwyer 2010D Magnehelic Differential Pressure Gage

Precision litho-printed scale is accurate and easy to read.Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.Pointer stops of molded rubber prevent pointer over-travel without damage.InchWishboneInch assembly provides mounting for helix, helix bearings and pointer shaft.Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.O-ring seal for cover assures pressure integrity of case.

Latest Comments for Dwyer 2010D Magnehelic Differential Pressure Gage


Другие рекомендуемые продукты Dwyer


Dwyer V8-WP2 Flow Switch
Dwyer DLI-P-NIST Data Logger
Dwyer 668-5 Differential Pressure Transmitter
Dwyer V4-SS-2U Flow Switch
Dwyer RMA-21-SSV Flowmeter (1-10 Lpm Air)
Dwyer RMA-150-SSV Flowmeter
Dwyer RMA-26-SSV Flow Meter
Dwyer RMB-52 Flowmeter
Dwyer Magnehelic 2000-500pa Differential Pressure Gages
Dwyer RHP-3F1A Humidity/temperature Transmitter
Dwyer 128-056-03-1000-150 Box-type Temperature Sensor
Dwyer DCT 606 Control Card
Dwyer TE-DFG-E-06-4-4-00 Box-type Temperature Sensor
Dwyer V6EPB-B-S-LF Mini-size Flow Switch
Dwyer ADPS-05-2-N-OEM Differential Pressure Switch
Dwyer WWDP-3-LCD Differential Pressure Transmitter
Dwyer 3000-500Pa Pressure Gauge
Dwyer RMA-14-SSV Flow Meter