Mts Sensor TH Analog Linear Position Sensor

Mts Sensor

Номер продукта: TH Analog
Продюсер: Mts Sensor
Confirmed Rating: ☆☆☆☆ ☆☆ (2.2)
Rating Count: 13082

Вы можете заполнить форму онлайн-предложения или связаться со службой поддержки в режиме реального времени для получения информации. Mts Sensor бренд, TH Analog продукт. Мы свяжемся с вами как можно скорее.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Mts Sensor TH Analog Linear Position Sensor

Description for Mts Sensor TH Analog Linear Position Sensor

OutputCurrent 4(0)…20 mA, 20…4(0) mA (minimum / maximum load 0 / 500 Ω)Measured value PositionMeasurement parametersResolution 16 bit; 0.0015 % (minimum 1 µm) 1Cycle time 0.5 ms up to 1200 mm stroke length1.0 ms up to 2400 mm stroke length2.0 ms up to 4800 mm stroke length5.0 ms up to 7620 mm stroke lengthLinearity 2 < ±0.01 % F.S. (minimum ±50 µm)Repeatability < ±0.001 % F.S. (minimum ±2.5 µm) typicalHysteresis < 4 µm typicalTemperature coefficient < 30 ppm/K typicalOperating conditionsOperating temperature −40…+75 °C (−40…+167 °F)Humidity 90 % relative humidity, no condensationIngress protection Version D, G and E: IP66 / IP67 (if properly connected by means that support IP66 / IP67(pipe, gland, etc.))Version N: IP66, IP67, IP68, IP69K, NEMA 4X, depending on cable glandShock test 100 g (single shock), IEC standard 60068-2-27Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded)EMC test Electromagnetic emission according to IEC/EN 55011 +A1 Class BElectromagnetic immunity according to IEC/EN 61000-6-2The sensor meets the requirements of the EU directives and is marked withOperating pressure 350 bar static (5076 psi static)Magnet movement velocity 3 AnyDesign / MaterialSensor electronics housing Stainless steel 1.4305 (AISI 303); option: Stainless steel 1.4404 (AISI 316L)Flange See “Table 1: TH rod sensor threaded flange type references” on page 6Sensor rod Stainless steel 1.4306 (AISI 304L); option: Stainless steel 1.4404 (AISI 316L)Stroke length 25…7620 mm (1…300 in.)Mechanical mountingMounting position AnyMounting instruction Please consult the technical drawings and the operation manual (document number: 551513)Electrical connectionConnection type T-Series terminalOperating voltage +24 VDC (−15 / +20 %)Ripple ≤ 0.28 VPPCurrent consumption 100 mA typicalDielectric strength 700 VDC (DC ground to machine ground)Polarity protection Up to −30 VDCOvervoltage protection Up to 36 VDC

Latest Comments for Mts Sensor TH Analog Linear Position Sensor

Другие рекомендуемые продукты Mts Sensor