Barksdale Series 433, 435, 436 Non-Incendive Transducer

Barksdale

Ürün No: Series 433, 435, 436
Üretici: Barksdale
Confirmed Rating: ☆☆☆☆☆ ☆ (3.7)
Rating Count: 10041

Barksdale markalı, Series 433, 435, 436 koduna sahip Barksdale Series 433, 435, 436 Non-Incendive Transducer isimli ürün hakkında detaylı bilgi almak için lütfen canlı destek ekibimiz ile hemen iletişime geçin ya da bir online teklif formu doldurun. Size en kısa sürede dönüş yapacağız.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Barksdale Series 433, 435, 436 Non-Incendive Transducer

Description for Barksdale Series 433, 435, 436 Non-Incendive Transducer

Barksdale's 430 Series Non-IncendiveTransducers prevent an explosion from occurring when operated in a Division II environment. Barksdale's 430 Series, non-incendive transducers prevent personal injury and machinery damage by preventing the explosion in the first place. Energy generated within the transducer is of such a low level that intermittently present flammable vapors will not be ignited. External zener barriers are not required in order to meet UL requirements for a non-incendive installation. Three models are available: Series 433 (0-5V), Series 435 (4-20mA) and Series 436 (0-10V).General Specifications*Accuracy (LH & R):±0.25% FSO at 75°F (±0.5% for vacuum only [-23]) typicalLong Term Stability:±0.5% FSO of calibration curveTypical Life Cycle:100 million cyclesProof Pressure:2 times rated pressure or 13,000 psi max. (884 bar), whichever is lessInput:433:436:435:Excitation voltage: 11 to 30 VDCExcitation voltage: 14 to 30 VDCExcitation voltage: 12 to 28 VDCSupply Current:3.0 mA maximum (no load)Min. Load Resistance:2K ohms (voltage series)Output:433:436:435:Output: 0.5 to 5.5 VDCFull scale output: 5.0 VDC ± 0.8%Zero output: 0.5 VDC ± 0.4%Output: 1 to 11 VDCFull scale output: 10 VDC ± 0.4%Zero output: 1.0 VDC ± 0.2%Output: 4 to 20 mAFull scale output: 16 mA ± 1%Zero output: 4 mA ± 2%Wetted Parts:17-4 PH (fitting) & 300 stainless steel (sensor)Enclosure:NEMA 4, 300 series stainless steelPressure Connection:1/4”-18 NPT maleResponse Time:2kHzElectrical Connection:3 conductor for voltage series and 2 conductor for current series, 24 awg, PVC jacketed, shielded cable, 3 ft. (1 m) long with integral strain relief and case ground (standard).Temperature Ranges:Operating:Compensated:Storage:-40° to 158°F (-40° to 70°C)-40° to 158°F (-40° to 70°C)-40° to 185°F (-40° to 85°C)Temperature Shift:Zero & Span:0.01% per °F over compensated rangeVibration:15 g’s, 10-2000 Hz, MIL-STD 202Shock:50 g’s, 11 ms, MIL-STD 202 Method 213, Cond. G.Approvals:Nonincendive pressure transmitters are UL and cUL approved as telemetering equipment for use in Div. 2 hazardous locations as follows:Class I, Div. 2, Groups A, B, C & DClass II, Div. 2 Groups F & GAgency approval varies by electrical termination type as follows:H5(-E) models are cULus listed in UL File E146589, (WYMV, WYMV7).H3(-E), T4(-E) & T5 (-E) models are cURus recognized components in UL File E146589, (WYMV2, WYMV8).Weight:433 & 436:435:7.4 oz. (221 grams) to 1,000 psi9.9 oz. (281 grams) 2,000 psi and higher7.4 oz. (210 grams) to 1,000 psi9.4 oz. (266 grams) 2,000 psi and higherWarranty:1 year warranty* See product confi gurator for additional options.Wiring CodeMILLIVOLT SERIES - 433 & 436(T4/T5)(H3/H5)Signal1Red+ Excitation3White+ Output2BlackCommon4BareDrainMILLIAMP SERIES - 4351Red+ Excitation2Black- Excitation4BareCase Drain

Latest Comments for Barksdale Series 433, 435, 436 Non-Incendive Transducer

İlginizi Çekebilecek Ürünler Barksdale