Barksdale Series S20517 Stainless Steel Pressure Regulator
Product Name: Barksdale Series S20517 Stainless Steel Pressure Regulator
Product Brand: Barksdale
Product Code: Series S20517
Product Artikel: Barksdale Series S20517 Stainless Steel Pressure Regulator
Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The Stainless Steel Regulators offer corrosive-resistant, 316 stainless steel, units with SAE J518-2 code 62 flanges, which are standard with this series. Code 62 flanges are industry proven leak-free connections suited for higher pressure that offer ease of installation. Designed to provide years of trouble-free operation and virtually zero leakage, the Shear-Seal® design uses fluid pressure to maintain a leak-free metal-to-metal seal that improves with use. The shearing action between the rotor & pressure seal continually laps the mating surfaces and prevents contaminates from lodging between the sealing surfaces. The result is a valve that doesn’t wear out – but wears in over time, providing you superior control consistently through the entire life of the product. General Specifications* Pressure: Supply/Inlet Pressures: Regulated Pressure Range at 3,000 psi Supply Pressure: High Sensitivity: Full Range: Regulated Pressure Range at 5,000 psi Supply Pressure: High Sensitivity: Full Range: Ambient Temperature Range: Inlet Proof Pressure: Case Proof Pressure: 3,000 psi (207 bar) 5,000 psi (345 bar) 300 - 1600 psi (21 - 110 bar) 300 - 2800 psi (21 - 193 bar) 500 - 1600 psi (34 - 110 bar) 500 - 3000 psi (34 - 207 bar) -30° to +185°F (-34° to +85°C) 7,500 psi (517 bar) 4,500 psi (310 bar) Flow: Flow Rate: Cv Outlet: Cv Vent: 120 GPM (@ 50 ft/s) 17.5 1.6 Porting: Supply 1: Supply 2: Outlet (Regulated): Vent: 1” SAE J518 code 62 flange; NPT or SAE porting option 1” SAE J518 code 62 flange; NPT or SAE porting option 1-1/2” SAE J518 code 62 flange; NPT or SAE porting option 1” SAE J518 code 62 flange; NPT or SAE porting option Materials of Construction: External Components Body, Flanges, & Spring Housing: Adjusting Handle, Gear Housing: (for motorized models) Hardware: Wetted Componetns Slide, Inlet, Vent & Blocking Plates, Pressure Seals: Other Internal Wetted Components: O’ring Material: Backup Ring Material: 316 Series stainless steel Nickel Plated 17-4 ST STL 316 Series stainless steel 400 Stainless steel 300 Series stainless steel Buna N PTFE Pneumatic Pilot Motor (“F” prefix): Pilot Motor Working Pressure: Porting A & B: Operating Temperature Range: Painted steel 80 - 120 psi (5.5 - 8.3 bar) 1/4” NPT -30° to +185°F (-34° to +85°C) Hydraulic Pilot Motor (“G” prefix): Pilot Motor Working Pressure: Porting A & B: Operating Temperature Rating: Painted steel 400 - 1600 psi (6.9 - 110 bar) SAE for 3/8” tube (Size -6) -30° to +185°F (-34° to +85°C) Approximate Shipping Weight**: Manual Unit: Pneumatic Motor Unit: Hydraulic Motor Unit: 85 lbs. (38.6 kg) 105 lbs. (47.6 kg) 105 lbs. (47.6 kg) * See product configurator for additional options. ** Weight is based on the code 62 flanges
