Barksdale Series S20517 Stainless Steel Pressure Regulator

Barksdale

Ürün No: Series S20517
Üretici: Barksdale
Confirmed Rating: ☆☆☆☆☆☆ (4.5)
Rating Count: 7574

Barksdale markalı, Series S20517 koduna sahip Barksdale Series S20517 Stainless Steel Pressure Regulator isimli ürün hakkında detaylı bilgi almak için lütfen canlı destek ekibimiz ile hemen iletişime geçin ya da bir online teklif formu doldurun. Size en kısa sürede dönüş yapacağız.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Barksdale Series S20517 Stainless Steel Pressure Regulator

Description for Barksdale Series S20517 Stainless Steel Pressure Regulator

Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The Stainless Steel Regulators offer corrosive-resistant, 316 stainless steel, units with SAE J518-2 code 62 flanges, which are standard with this series. Code 62 flanges are industry proven leak-free connections suited for higher pressure that offer ease of installation.Designed to provide years of trouble-free operation and virtually zero leakage, the Shear-Seal® design uses fluid pressure to maintain a leak-free metal-to-metal seal that improves with use. The shearing action between the rotor & pressure seal continually laps the mating surfaces and prevents contaminates from lodging between the sealing surfaces. The result is a valve that doesn’t wear out – but wears in over time, providing you superior control consistently through the entire life of the product.General Specifications*Pressure:Supply/Inlet Pressures:Regulated Pressure Range at 3,000 psi Supply Pressure:High Sensitivity:Full Range:Regulated Pressure Range at 5,000 psi Supply Pressure:High Sensitivity:Full Range:Ambient Temperature Range:Inlet Proof Pressure:Case Proof Pressure:3,000 psi (207 bar)5,000 psi (345 bar)300 - 1600 psi (21 - 110 bar)300 - 2800 psi (21 - 193 bar)500 - 1600 psi (34 - 110 bar)500 - 3000 psi (34 - 207 bar)-30° to +185°F (-34° to +85°C)7,500 psi (517 bar)4,500 psi (310 bar)Flow:Flow Rate:Cv Outlet:Cv Vent:120 GPM (@ 50 ft/s)17.51.6Porting:Supply 1:Supply 2:Outlet (Regulated):Vent:1” SAE J518 code 62 flange; NPT or SAE porting option1” SAE J518 code 62 flange; NPT or SAE porting option1-1/2” SAE J518 code 62 flange; NPT or SAE porting option1” SAE J518 code 62 flange; NPT or SAE porting optionMaterials of Construction:External ComponentsBody, Flanges, & Spring Housing:Adjusting Handle, Gear Housing:(for motorized models)Hardware:Wetted ComponetnsSlide, Inlet, Vent & Blocking Plates, Pressure Seals:Other Internal Wetted Components:O’ring Material:Backup Ring Material:316 Series stainless steelNickel Plated 17-4 ST STL316 Series stainless steel400 Stainless steel300 Series stainless steelBuna NPTFEPneumatic Pilot Motor (“F” prefix):Pilot Motor Working Pressure:Porting A & B:Operating Temperature Range:Painted steel80 - 120 psi (5.5 - 8.3 bar)1/4” NPT-30° to +185°F (-34° to +85°C)Hydraulic Pilot Motor (“G” prefix):Pilot Motor Working Pressure:Porting A & B:Operating Temperature Rating:Painted steel400 - 1600 psi (6.9 - 110 bar)SAE for 3/8” tube (Size -6)-30° to +185°F (-34° to +85°C)Approximate Shipping Weight**:Manual Unit:Pneumatic Motor Unit:Hydraulic Motor Unit:85 lbs. (38.6 kg)105 lbs. (47.6 kg)105 lbs. (47.6 kg)* See product configurator for additional options.** Weight is based on the code 62 flanges

Latest Comments for Barksdale Series S20517 Stainless Steel Pressure Regulator

İlginizi Çekebilecek Ürünler Barksdale