Meggitt Vibro-Meter IPC704 Signal Conditioner

Meggitt

Ürün No: Vibro-Meter IPC704
Üretici: Meggitt
Confirmed Rating: ☆☆☆☆ ☆☆ (2.7)
Rating Count: 14229

Meggitt markalı, Vibro-Meter IPC704 koduna sahip Meggitt Vibro-Meter IPC704 Signal Conditioner isimli ürün hakkında detaylı bilgi almak için lütfen canlı destek ekibimiz ile hemen iletişime geçin ya da bir online teklif formu doldurun. Size en kısa sürede dönüş yapacağız.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for Meggitt Vibro-Meter IPC704 Signal Conditioner

Description for Meggitt Vibro-Meter IPC704 Signal Conditioner

Signal conditioner for use with accelerometers (CA) and dynamic pressure sensors (CP).The IPC704 signal conditioner is a high-quality, high-reliability charge-converter for use with piezoelectric sensors: CA accelerometers and CP dynamic pressure sensors.The IPC704 is highly configurable (transfer function with optional integration, input and output sensitivities, high-pass and low-pass filtering), and provides either a current output or a voltage output. It is available in two versions for sensors using different piezoelectric materials (that is, standard piezoelectric material or GaPO4 piezoelectric material).The IPC704 is designed and built for long-term use in environments characterised by hazardous areas (potentially explosive atmospheres).Note: The IPC704 signal conditioner is being replaced by the IPC707 signal conditioner.FeaturesSignal conditioning for CA accelerometers and CP dynamic pressure sensorsVery wide frequency range (0.5 to 20000 Hz) with configurable high-pass and low-pass filtersConfigurable transfer function (input sensitivity, output sensitivity and units), with optional integrator to provide a velocity outputCurrent output for signal transmission over long distances or voltage output for signal transmission over short distancesCertified for use in potentially explosive atmospheres PARAMETER VALUE (IMPERIAL | METRIC) Output type Current (2-wire) or voltage (3-wire) Measurement system CA vibration or CP dynamic pressure Sensor CA accelerometers or CP dynamic pressure sensors Sensitivity See transfer function characteristics and curves in data sheet Frequency range 0.5 to 20000 Hz Linearity ≤0.2% Operating temperature range −22 to 185 °F | −30 to 85 °C Protection rating IP40 Hazardous area certifications Ex ia, Ex ib, Ex nA, AEx nA

Latest Comments for Meggitt Vibro-Meter IPC704 Signal Conditioner

İlginizi Çekebilecek Ürünler Meggitt