MOXA AWK-4131A-T Access Point

MOXA

Ürün No: AWK-4131A-T
Artikelnummer: AWK-4131A-T
Üretici: MOXA
Confirmed Rating: ☆☆☆☆ ☆☆ (2.5)
Rating Count: 5698

MOXA markalı, AWK-4131A-T koduna sahip MOXA AWK-4131A-T Access Point isimli ürün hakkında detaylı bilgi almak için lütfen canlı destek ekibimiz ile hemen iletişime geçin ya da bir online teklif formu doldurun. Size en kısa sürede dönüş yapacağız.
PLEASE MAIL TO: info@industrialmaterialcenter.com

Datasheets for MOXA AWK-4131A-T Access Point

Description for MOXA AWK-4131A-T Access Point

WLAN InterfaceWLAN Standards 802.11a/b/g/n802.11i Wireless SecurityModulation Type DSSSOFDMMIMO-OFDMFrequency Band for US (20 MHz operating channels) 2.412 to 2.462 GHz (11 channels)5.180 to 5.240 GHz (4 channels)5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.5.745 to 5.825 GHz (5 channels)Frequency Band for EU (20 MHz operating channels) 2.412 to 2.472 GHz (13 channels)5.180 to 5.240 GHz (4 channels)5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.Frequency Band for JP (20 MHz operating channels) 2.412 to 2.484 GHz (14 channels)5.180 to 5.240 GHz (4 channels)5.260 to 5.240 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.Wireless Security WEP encryption (64-bit and 128-bit)WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)WPA/WPA2-PersonalTransmission Rate 802.11b: 1 to 11 Mbps802.11a/g: 6 to 54 Mbps802.11n: 6.5 to 300 MbpsTransmitter Power for 802.11a 23±1.5 dBm @ 6 to 24 Mbps21±1.5 dBm @ 36 Mbps20±1.5 dBm @ 48 Mbps18±1.5 dBm @ 54 MbpsTransmitter Power for 802.11n (5 GHz) 23±1.5 dBm @ MCS0/8 20 MHz18±1.5 dBm @ MCS7/15 20 MHz23±1.5 dBm @ MCS0/8 40 MHz17±1.5 dBm @ MCS7/15 40 MHzTransmitter Power for 802.11b 26±1.5 dBm @ 1 Mbps26±1.5 dBm @ 2 Mbps26±1.5 dBm @ 5.5 Mbps25±1.5 dBm @ 11 MbpsTransmitter Power for 802.11g 23±1.5 dBm @ 6 to 24 Mbps21±1.5 dBm @ 36 Mbps19±1.5 dBm @ 48 Mbps18±1.5 dBm @ 54 MbpsTransmitter Power for 802.11n (2.4 GHz) 23±1.5 dBm @ MCS0/8 20 MHz18±1.5 dBm @ MCS7/15 20 MHz23±1.5 dBm @ MCS0/8 40 MHz17±1.5 dBm @ MCS7/15 40 MHzTransmitter Power Transmitter Power Read moreReceiver Sensitivity for 802.11a (measured at 5.680 GHz) Typ. -90 @ 6 MbpsTyp. -88 @ 9 MbpsTyp. -88 @ 12 MbpsTyp. -85 @ 18 MbpsTyp. -81 @ 24 MbpsTyp. -78 @ 36 MbpsTyp. -74 @ 48 MbpsTyp. -72 @ 54 MbpsNote Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) Typ. -69 dBm @ MCS7 20 MHzTyp. -71 dBm @ MCS15 20 MHzTyp. -63 dBm @ MCS7 40 MHzTyp. -68 dBm @ MCS15 40 MHzNote Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.Receiver Sensitivity for 802.11b (measured at 2.437 GHz) Typ. -93 dBm @ 1 MbpsTyp. -93 dBm @ 2 MbpsTyp. -93 dBm @ 5.5 MbpsTyp. -88 dBm @ 11 MbpsReceiver Sensitivity for 802.11g (measured at 2.437 GHz) Typ. -88 dBm @ 6 MbpsTyp. -86 dBm @ 9 MbpsTyp. -85 dBm @ 12 MbpsTyp. -85 dBm @ 18 MbpsTyp. -85 dBm @ 24 MbpsTyp. -82 dBm @ 36 MbpsTyp. -78 dBm @ 48 MbpsTyp. -74 dBm @ 54 MbpsReceiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) Typ. -70 dBm @ MCS7 20 MHzTyp. -69 dBm @ MCS15 20 MHzTyp. -67 dBm @ MCS7 40 MHzTyp. -67 dBm @ MCS15 40 MHzWLAN Operation Mode Access point, Client, Client-Router, Master, Slave, SnifferAntenna External, 3/6 dBi, Omni-directionalWLAN Antenna Connector 2 N-type femaleEthernet InterfaceStandards IEEE 802.3 for 10BaseTIEEE 802.3u for 100BaseT(X)IEEE 802.3ab for 1000BaseT(X)IEEE 802.3af for PoEIEEE 802.1D-2004 for Spanning Tree ProtocolIEEE 802.1w for Rapid Spanning Tree ProtocolIEEE 802.1Q for VLAN TaggingPoE Ports (10/100/1000BaseT(X), RJ45 connector) 

Latest Comments for MOXA AWK-4131A-T Access Point

İlginizi Çekebilecek Ürünler MOXA